Radio model BR.AN60271GNN+Ycam need factory reset procedure.

Question edited to what I think you thought you were saying.
Question moved to make model category.

Try the reset
https://www.google.com/search?q=Toyota+Corolla+RunX+cd+drawer+not+closing

..

USA< factory radio, not upgraded later, IDK.?
in the fuse box , opened
marked radio.
the manual for car calls this stuff entertainmemt systems, and are many options new , some cars 8 more more options, you never told your model number on radio. there.
BASE sys.
fuse 6 in J/B and if blow all accessories go dead.\

then BOSE system.
same fuse #6
same for midline radio, fuse 6
M4 PG_power box
im just reading at Alldata.com so can you , anyone can really.

fuse 6 kills dead tail and turn lamps too, is it?
in fact 19 things go dead with Fuse 6 blown.

your users guide in the glove box (lost ?)
tell you where all fuse boxes are, in fact.
dash and engine bay both.
J/B box (junction box) is about near drivers knee USA.
left hand drive. cars here.
JB has fuse 6, one looks under dash with a flash light and behold the J/B is there, on this car.
the manual show it far left lower side of dash
behind that plastic shin protection. stuff.

why ask 2 times?
why buy bricked radios?
no idea at all what you bought (me)
is it a jeep radio.?
then take it to jeep. and ask.
they will ask for proof that you own it , legally.
here , see 1 to 4 here. of the 6.
http://jeepdied.com/pdf%20and%20more/keep-alive.html#radio

all modern USA factory radio's
not Aftermarket (yah buy those)
are security radios.
this is by USA Federal laws, need a copy of that?

do not buy radios. off fleabay unless the seller
promises the provided code works. (make them promise)
if not,. you get your money back.
if try dont promise "walk"
so why not click ask seller a question.
then say , the radios no good I want to return it
and in 5 min, he refunds you. or you get to file a complaint, do so, if not refunded,
Fleabay is not buyer , protected, and sellers are all losers now.
or buy with CC, and get the CC to reverse the charges. in seconds, (last resort)
but I do hope jeep gives you a code.
PW
but they may not if the see it is from someone elses car, they can look that up btw.

true
radio may be wired in with the e mobilizer

link wont highlight 06 radio wiring info
http://www.installer.com/cars/by_car.php?carid=5987


may need a diagnostic reader to re set the systems modules

you need a glove box owners book

not sure if sanyo was a factory fit
is it either of these
2001 model Isuzu radio

You would have to provide make/model of both CAR and the STEREO.

It requires a code entering to activate (generally a 4 digit number). Have a look in the manual as the code may have been written down in there. Also, some people write the code on the radio itself but this requires removal of the radio to find out. If you do take it out, make a note of the serial numbers and any bar codes on the stickers and with luck someone may be able to generate the code. If it is an original factory fitted radio then your local Ford dealership may be able to help as the radios are coded to the vehicle.

factory radios need code (pass word) to operate if the
cars battery goes dead or is disconnected.
no year car stated...
this question has been asked like 1000's of times here. (or millions world wide, google that)
and the answers is same on all cars. made.
the operators guide answers this, but here are all choices.
"my radio is bricked"

6 ways? pick one?

http://www.fixkick.com/power-elect/Keep-Alive/keep-alive.html#radio

Procedure:
1. Turn the ignition ON (The radio should display "LOC")
2. Hold down the Radio Presets 2 and 3 buttons for six seconds
3. The radio display changes from LOC to a three-digit number. Write this number down. You now have fifteen seconds to complete the next step.
4. Press the AM/FM button
5. The radio display changes to another three-digit number. Write this number to the right of the first one.
6. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05
7. Call 1-800-537-5140
8. Press 1 then # (pound). You'll hear "Invalid Code, try again"
9. Press 139010 or 106010 or 206010 or 202107 then # (pound). You will be asked to enter your four or six digit code followed by *
10. Enter the number from STEP 6 then *
11. Listen to the four-digit number and write it down. It will be repeated twice
12. Turn the ignition ON (The radio displays LOC)
13. Use the MN and HR buttons to enter the code from STEP 11
14. Press the AM/FM button. The radio display changes to "SEC". Your radio is now "un-locked" and usable.

Dealership Codes•139010
•106010
•206010
•202107
Troubleshooting
If you fail to enter the correct code eight times, the radio goes into INOP mode. You have to wait an hour with the ignnition on before the radio returns to LOC mode.

http://www.impalaforums.com/chevy-impala-8th-gen-discussion/270328-how-to-reset-gm-theft-lock-radios.html

Hello WHAT THE HECK HAPPENED !

When power is disconnected from the vehicles on board computers, they reset themselves to factory standards.

To have all system monitors reset themselves... a standard driving procedure has to be followed. Please see the link for a Accent model to give you an idea of what to do. If you can't find the exact procedure for your vehicle, the link for the Accent model should work for your Elantra.

PS: Check to make sure the spark plugs leads went to the correct cylinder.
Are you showing any Service Engine idicators on the dash?
How to Complete Hyundai Accent Drive Cycle