Question about Hummer H3
Open rear door remove the two screws and gently slide the rear lense out. You should be able to take the bulb out from there replace it and slide the lense back own.
Posted on Aug 31, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Open tailgate 2 screws hold housung in. Remonve the screws pull the huosing out and change bulb. On mine the housing had melted so O called the Ford garage and they got the socket out for me. I had to buy a new socket but that was it.
Posted on Aug 03, 2008
This is straight from the owner's manual.
#1 Make sure the headlamp switch is in the OFF position and open the trunk.
#2 Carefully pull the carpet away to expose the backside of the tail lamp assembly.
#3 Remove the nut and washer assemblies, then pull the lamp assembly away from the vehicle.
#4 Remove the bulb socket by rotating it counterclockwise, then pulling it out of the lamp assembly.
#5 Pull the bulb straight from the socket.
Install new bulb(s) in reverse order.
Posted on Jan 23, 2010
There is an access panel on the inside rear sides by the lift gate. They pop out giving you access to the bulbs. I recommend replacing both at the same time since they seem to "blow" within a few days of each other.
Posted on Jun 07, 2010
Tips for a great answer:
Jul 09, 2014 | 2004 Mercury Mountaineer
Feb 27, 2011 | 1998 Plymouth Neon
Sep 14, 2009 | 2006 Chrysler PT Cruiser
Jul 19, 2009 | 1998 Chevrolet Cavalier
Aug 08, 2008 | 2001 Jeep Cherokee
541 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: