Question about 2006 Ford F 350 Super Duty

Open Question

How do i remove the locking hub on 06 ford f350

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: ford f350 drum brake

Solution #1 is WRONG. I own a 1990 F350 XLT Lariat dually. The axles DO NOT have to be pulled out on this truck. I did mine yesterday and if u listen to the directions on #2 you'll be fine

Posted on May 03, 2009

Ad
karmacanic
  • 16 Answers

SOURCE: HOW DO I REMOVE A LOCKING HUB ON A 1994 FORD I DONT KNOW HOW

you need a special 4 point socked to remove & reinstall the bearing retainer locking ring. any good parts shop can sell you one.
note: reinstallation & bearing pre-loading is done with the same socket & a torque wrench.
buy the Haynes manual for your make & model vehicle, all the knowledge you need is in there.

Posted on Oct 02, 2009

  • 66 Answers

SOURCE: What parts are needed to convert my 1996 Ford F350

go to a good 4 wheel drive store and they will set you up with a set of warn manual hubs!!

Posted on Oct 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 f350 4x4 will not go in to 4wheel drive when the hub are in the auto position if i lock them it works. Looking for a repair manual Brad


vacumed line pull the hub lock in auto
check the line at selenoid (right side fender under hood)
for voltaged when in auto and for vacumed then follow line to hubs
check for cut or pinch or rubbed or burned
disconect at hub and test there for vacumed if yes
pull hubs off clean and inspect o-rings

Dec 17, 2010 | 2004 Ford F350

1 Answer

05 f350. trying to remove hub assembly on front left wheel. I am doing the ball joints and axle shaft joint.


Once you remove the locking hub, the hub and bearing unbolt. There are two different styles of locking hubs. One is held on with a large snap ring that you can pinch with your hands. Once that's out you can pull the locking hub off. The other style bolts on with about 6 or 7 small allen or torx head bolts. Once you remove the bolts the hub pulls out also. They can sometimes get stuck and will require some force.
The axle is also a bit tricky to remove if you've never done it before. You will need two fairly large pry bars and pry between the u-joint ears and the axle tube evenly on both sides to push it out. The axle seal is very tight, also pricey if you damage it, so be careful.

Jul 06, 2010 | 2005 Ford F 350 Super Duty

1 Answer

How can i trouble shoot my 2001 f350 ford 4x4 system


What specifically is it doing or not doing? The easy: If the 4x4 is not working, manually lock the hubs in. If it works then you have a vaccum problem with the lines going to the hubs or in the hubs themselves

Nov 06, 2009 | 2001 Ford F350 Super Duty SuperCab

1 Answer

What parts are needed to convert my 1996 Ford F350 auto hubs to manual locking hubs?


go to a good 4 wheel drive store and they will set you up with a set of warn manual hubs!!

Oct 14, 2009 | 1996 Ford F350 Crew Cab

2 Answers

4 wheel drive (auto locking hubs) seems to be trying to engage.


I had the same thing happen. The automatic locking hubs are faulty, causing one or both hubs to try to engage or disengage onto the front driveshaft. This makes the clicking noise and loud clunking that you hear. You may notice your steering pulling to one side of the road,because one hub is locked in. Replace the automatic hubs with new ones, do not try to fix the old ones. I liked the
convience of automatic hubs but replaced mine with manual hubs, there just way more reliable.

Jun 04, 2009 | 1994 Ford F350 Crew Cab

1 Answer

When in auto hubs the 4 wheel drive doesn't work


They are operated by vacuum. Check to make sure the vacuum lines are connected and not ripped or anything. If that checks out fine, remove the vacuum line from the hub and apply vacuum to the hub, if the hubs lock then the problem is in the vacuum line or switch.

Apr 08, 2009 | 2006 Ford F 350 Super Duty

2 Answers

How do you change glow plugs in 06 f350 powerstroke? where is /are speed sensors on 06 f350 superduty powerstroke


remove the inner wheel wells or cut it back to get some access its tight that way though i would just remove the two of them its 10& 11 mm on the top sidde just let everthing hang , it is either 5.5 mm or a 7 mm . the speed sensor is in the transfer case for the 4x4 or on theh rear on the trans for 2wd

Feb 18, 2009 | 1995 Ford F350

2 Answers

Ford F350 Diesel 4x4 problem


Check to see if you can still turn the hub lock outs by hand (if app) My guess would be not. They probably need to be replaced or taken apart and re-greased.

Jan 11, 2009 | 1999 GMC Sierra

2 Answers

2004 F350 Powerstroke won't go into 4 wheel drive


do you have automatic hubs, or do you have to lock them manuelly?

Nov 24, 2008 | 2004 Ford F350

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...