Question about 1999 Chevrolet Silverado 1500

1 Answer

How to remove fan from water pump, '99 silverado 4.8

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 62 Answers

The is a special flat wrench and pulley holder to remove. there is also a wrench kit from lisle tool that make for use with an air hammer that works great. Note: the thred on the fan is right hand

Posted on Aug 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I'm changing the water pump on a 99 silverado with



  • Here is a diagram of your belt drives. The red circle in the diagram is your tensioner.


ironfist109_373.jpg


  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 11, 2011 | 1999 Chevrolet K1500

1 Answer

How do i change a water pump on 1996 grand cherokee limited V8


I'll assume you have a 4.0l

The 4.0L engine is equipped with a reverse rotation (counterclockwise) water pump. The word REVERSE is stamped or imprinted on the cover of the viscous fan drive and on the inner side of t he fan. The letter R is stamped onto the water pump impeller. When replacing water pump, ensure proper pump is installed. Installation of the wrong water pump will cause engine overheating.

NOTE:On models with 4.0 L engine, front grill must be removed to access radiator draincock. Draining cooling system can be accomplished by removing drain plug from side of block as well as by loosening radiator draincock. Drain plug is located on lower left side of engine block.

Disconnect negative battery cable. Drain cooling system. Disconnect electric cooling fan connector. Remove electric cooling fan and electric fan shroud assembly (if equipped).
Loosen, but do not remove, 4 water pump pulley-to-water pump hub bolts and 4 viscous fan-to-idler pulley nuts. Remove accessory drive belt. Remove 4 viscous fan to idler pulley nuts, and remove fan and shroud together.
Remove 4 water pump pulley bolts and remove pulley. Remove power steering pump and bracket. Disconnect heater hoses and lower radiator hose at water pump. Remove 4 water pump retaining bolts. Remove water pump.

to install just reverse procedures

Apr 05, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Change water pump


1 disconect neg.battery cable 2 drain the cooling system 3 remove air intake tube from filter housing to throttle body 4 remove top half of fan shroud 5 remove the serpentine belt 6 use a strap wrench to prevent the waterpump pulley from turning while turning the fan clutch in the counterclockwise direction. 7 remove fan and set aside 8 remove belt tensioner 9 remove hoses from water pump 10 remove 6 bolts, 3 on either side and remove the water pump. 11 remove the thermostat housing from the old pump and install on the new one. 12 re assemble in reverse order. make sure the mating surface of the engine block where the pump bolts on is clean and free of old gasket material before installing new pump and gaskets. When assembled fill cooling system, start engine and let idle untill thermostat opens and engine reaches operating temp.KEEP WATER LEVEL FULL. After a test drive recheck the coolant level, and you are done.

Mar 14, 2010 | 2000 Chevrolet Silverado 1500

2 Answers

Need to replaCE WATER PUMP 2002 GMC DURAMAX DIESEL how hard?


cardenderek,
This info is totally bogus.You obviousely have never changed a water pump on a 6.6 liter Duramax Diesel engine.1st off it isnt belt driven it is gear driven from the drive train inside the engine.You have to remove the fan shroud,clutch fan assem.,and harmonic balancer as one of the mounting bolts is behind the balancer.Also remove the left side inner fender for easier access.

catD8RII

Mar 12, 2010 | 2002 Chevrolet Silverado 2500HD

2 Answers

Removing fan on 99 denali ?


Check the rotation of the bolts. My 99 Suburban was reverse threaded. I messed with it for an hour trying the lefty loosie/ righty tighty normal thinking before realizing it was reverse threaded and I needed to turn them to the right to loosen them.

Feb 25, 2010 | GMC Yukon Denali Cars & Trucks

1 Answer

HOW DO I CHANGE MY WATER PUMP ON MY 99 GMC YUKON?


remove belt drain radiator remove fan shroud remove fan /pulley remove top hose on water pump and lower hose un bolt water pump remember mark bolts because lower longer need sealant due to they go into water jacket remove and clean around both water openings before setting in place hook up upper bypass hose easier to hook up before install--replace and rebolt everything

Oct 10, 2009 | 1999 GMC Yukon

1 Answer

Change water pump on the 91 silverado


is that the screw on clutch fan?
if it is call me and ill tell you how!!!!
574 370 1415

Apr 08, 2009 | 1991 Chevrolet Silverado 2500

1 Answer

How do you remove the fan from the water pump on a 1999 silverado


i have a 97 chevy tahoe and i did the water pump , boy was that a big mistake . well i did it but i needed help . you need to nock the bolt loose with a hamer , the dealer use a speacal tool just forthis becoues its crazy but it takes some force . a larg wrench and a cupole of good wacks will getr done , so if this is to vage but you can always call your local dealer and ask to speak to a service tech

Apr 01, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

99 Chevy Silverado is overheating after maintance on radiator


try checking the hoses for blockage,and if not that make sure the fan is working right as it might be the fan cluch,or your water pump may have went out,best of luck

Mar 12, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

I need to change the water pump on may 2000 chey pickup. I need guidance. Can you help!


easy job drain raditor,remove shroud remove fan,take off belt,take off hoses,remove the 4 bolts holding on the water pump scrape off old gaskets then put it all back together

Mar 04, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...