Question about 2001 Chrysler Town & Country

1 Answer

2001 Town & Country power window does not cme up

I have a 2001 Town & Country and the passanger power window does not come up. I opened the door and I noticed that the cable wiring for the carousel of the motor is out of its carousel. The carousel cover came off and all the cable got lose. The motor works but window does not go up. How do I fix this?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

You will need to replace the motor/regulator assembly. Your local parts store should carry them or order online. These should be in stock as this is a common problem. Removing the motor bolts will be a pain since they have a rubberized nut hold them in the rear. Try a vise grip on them or if all else fails pull on the motor and pop them out. The replacement assembly uses normal nuts. Pay close attention on how the old assembly bolts up (take a picture before you remove it) since you will have to move the assembly to wrestle it out of the door. Reinstall assembly and check operation before you put door panel back on.

Posted on Aug 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to lower four way power seat on a 2005 Chrysler town and country van


CHECK BY THE BACK OF LOWER SEAT CUSHION IF NOT GOT TO DEALER

May 23, 2012 | 2005 Chrysler Town & Country

1 Answer

My window is not closing town and country 2001


That is a statement

What is the question?

If you do not intent to get involved
& work on it yourself,how can we help

What have you done so far?

Checked switches,removed door
panel?

Jun 13, 2011 | 2001 Chrysler Town & Country

1 Answer

I lose power to the door locks on my 2001 chrysler


more than likely this is caused by a bad ground wire located within the door locks wiring harness

Jan 16, 2010 | 2001 Chrysler Town & Country

1 Answer

Looking for a diagram of the power steering system for a 2001 Chrysler Town & Country . Missing a hose that comes out of a filter looking thing W/ 4 hoses, under the bottom center of the vehicle.


Go buy a 3/8 inch transmission hose (most stores sell it by the foot) and cut it to length then reclamp it. I just did this to my 2001 Town/Country tonight and it worked wonderfully! Hope this helps you!

Dec 01, 2009 | 2001 Chrysler Town & Country

2 Answers

Air conditioner only works on high 99 chrysler town and country van we change the switch and the motor and it still doen't work on lower settings


you need a blower resistor maybe a blower motor also but the resistor is for speeds and it usually goes when the blower motor starts to draw too much power the resistor is outside under the cowl on the passanger side you may need a connector pigtail also the dealer will have what you need

Sep 21, 2009 | 1999 Chrysler Town & Country

1 Answer

Describe your 2001 Chrysler Town &


they are mixing fuel these days but look for spotson dry pavement and touch with a cloth and smell to verify

Aug 22, 2009 | 2001 Chrysler Town & Country

1 Answer

Describe your 2001 Chrysler Town &


Shouldn't set off air bag if you are taking off door panel. You could always disconnect negative battery cable to be extra careful. I have replaced both passenger and drivers windows with battery connected. Take your time in removing door panel so avoid breaking plastic retaining clips.

One nasty part of this job is removing bolts that hold window motor to the door. They have a rubberized nut on the backside. Sometimes you can hold them with vise grips. I've found if I just pull the motor really hard the bolt and nut slides out of rubber guide.

It is also a little tricky to remove the unit and reinstall it in the door. Just be patient and take your time.

One tip is to leave the door panel off after you install the new door motor/regulator unit. Simply plug in the window switch and make sure all is functioning correctly and then install door panel.


I buy the replacement window units online and save big bucks over the dealer.

Jul 18, 2009 | 2001 Chrysler Town & Country

2 Answers

Describe your 2001 Chrysler Town &


like a gas pump? it means you need gas....

Jul 08, 2009 | 2001 Chrysler Town & Country

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...