Question about 2004 Buick Rendezvous

Open Question

Help on removing the head rest of buick rendezvous

Help on removing the head rest of buick rendeznous 2004 i have the tool kentmoor j-42372

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2004 Buick Rendezvous AWD Light Stays On

Our 2002 did the same thing. Easy cheap fix! Pull the wheel off and check the wiring that goes to the wheel sensor. You will find after removing a few inches of wrap, a broken wire or two. This could be on either wheel, so check both. Fix the wires back up and you are good to go. Hope this helps!

Posted on Aug 01, 2008

  • 14036 Answers

SOURCE: 2002 Buick Rendezvous head gasket replacement

fix it your self .or take it to the garage. fixing it your self cheaper is cheaper. it will at least 700.00 dollars or more at a garage. depend on the condition of the head. its has to be fix you cant plug a leaking head gasket.

Posted on Apr 07, 2009

  • 9 Answers

SOURCE: program a garage door opener in 2004 buick rendezvous

I cannot find the 2004, but you can buy it from the dealer. You can download the 2003 and 2005 from this link. http://www.extendedgmwarranty.com/owners-manual/buick_owner_manuals.html

Posted on May 22, 2009

  • 176 Answers

SOURCE: heater core location in a 2004 buick rendezvous?

it is a 4 to 5 hours job
it is located under your dash in rear of center console

Posted on Jul 06, 2009

greg_margo
  • 1959 Answers

SOURCE: How do I reset my oil light on my 2004 Buick

Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.

Posted on Sep 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wheel bolts 2003 buick rondavew broke how to change


the best option is to remove the hub as it requires punching out the broken sections and punching in new studs
they are splined formed under the head and require a heavy hammer to drive them in so using something like a heavy tube ( long socket) big enough to miss the head will prevent damage to the rest of the hub

Nov 26, 2015 | 2003 Buick Rendezvous

1 Answer

How to change a 2004 Buick Rendezvous radiator and what tools are needed


Got to remove fans. Plastic housing. And lines a touch to it. Tools it varies .

Jul 04, 2015 | Buick Cars & Trucks

1 Answer

2004 Buick Rendezvous Heads-Up Display intermittent problems


Your vehicles instrument cluster speedometer and heads up display unit both receive the same signal from the engine computer for the vehicles speed.The engine computer receives a signal from the vehicle speed sensor in the transmission for this to operate.

This isn't a speed sensor or engine computer failure as both would be erratic or off on signal and usually the check engine light would also come on with this problem here.

One of the two either the instrument cluster or the heads up display unit is at fault and is causing this.

What needs to be done from here is a scan tool needs connected to the vehicle to observe the speed signal on the data list in the engine computer and also in the instrument cluster to see if the speeds match each other.

If the engine computer is showing a different speed then what the instrument cluster is showing then the instrument cluster has an internal failure and needs repaired or replaced.

If both the instrument cluster and the engine computer speed signals match each other then the heads up display unit is faulty and needs replaced.

This is how it needs to be checked/diagnosed to see which is at fault.This is best checked by a dealer using their scan tool but any shop that has a scan tool that can communicate with these systems can also check these here.

If it needs a new cluster or heads up display these would have to be bought at a dealer or the dealer can remove yours and send them in for repair to their authorized repair facility
.

Custom Wheels For Mustang

Jun 10, 2012 | 2004 Buick Rendezvous

1 Answer

2004 buick rendezvous glove box latch


remove the glove box - Buick Rendevous - 2003

Mar 01, 2012 | 2004 Buick Rendezvous

1 Answer

White smoke coming out of the tail pipe on my 2002 rendezvous, and no heat coming out of the heater... already changed the water pump, thermostat, coolant sensor,and I flush out the heater core,,,,is it...


head gasket it sounds like you have a warped head antifreeze burns white remove and have it milled and magnafluxed to check for cracks that will core your problem

Apr 23, 2011 | 2004 Buick Rendezvous

1 Answer

I have a 2004 Buick Rendezvous that runs hot. Replaced the thermostat, manifold gasket, radiator, had the fans checked and still runs hot. What else could be the problem?


cylinder head gaskets, or cracked cylinder heads, this is a bad problem with the 3400 engine, so bad that we keep a set of heads in stock at the shop.....SORRY

Nov 14, 2010 | 2002 Buick Rendezvous

1 Answer

How to remove headrest?


Just raise it to the top of the travel then depress the button on the top of the seat chair where the rods attach tot he head rests, once depressed pull the rest of the way out... Easy

Sep 14, 2009 | 2007 Buick Rendezvous CXL SUV

1 Answer

What tools to change brakes on 2004 Rendezvous


2 CALIPER BOLTS EITHER A REGULAR WRENCH OR 3/8 ALLEN WRENCH. MEDIUM SIZE C-CLAMP TO PUSH IN THE CYLINDER ON THE CALIPER , AND HIGH TEMP BRAKE GREASE TO PUT ON CALIPER BOLTS WHEN RETIGHTENING. HOPE THIS HELPS CRAIG.
HERES A LINK TO LOOK AT I FOUND TOO!!

http://www.2carpros.com/how_to/how_to_replace_brakes.htm

Jul 31, 2009 | 2004 Buick Rendezvous

1 Answer

How do you remove the venture headrests? i want to add a seat cover, and there are holes for the headrest posts to go through


There is tool required by GM dealership to remove head rest.

Tool # J 42372

Pull the seat toward steering wheel. Raise the head rest and insert the tool and take it off.

Jul 11, 2009 | 2003 Chevrolet Venture Passanger

Not finding what you are looking for?
2004 Buick Rendezvous Logo

Related Topics:

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...