Question about 2000 Ford Expedition

1 Answer

When I turn my car on, I hear 5 chymes coming from the fuse panel by my left leg. It will stop for about 3 seconds then it will do it again. It repeats this about 4 or 5 times, what is this?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,596 Answers

Seat Belt Chime

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buzzing sound coming from under the back end


Under the left side of your back seat is a fuse / relay box . When you first turn the key on the fuel pump relay turns on for a few seconds to prime the fuel system . That relay is in that fuse / relay box ,that is what your hearing . Does the vehicle start an run good , no problems other then the buzzing sound .The vehicle battery is also under the rear seat on the right side . How To Locate and disconnect Battery Buick Lesabre Pontiac Bonneville 00...

Feb 19, 2016 | 2002 Buick LeSabre Custom

1 Answer

1989 deville load level compressor runs for 3 seconds then stops after turning ignition switch on


Check and make sure that the level control lever that goes to your shocks was reconnected. Might have been overlooked....Hope this helps.

Mar 30, 2014 | 1989 Cadillac Sedan DeVille

2 Answers

Radio has stopped working, but the panel on the radio stays lit in red when the car is turned off,( the little light items on the radio which would normally go on when the lights are turned on. it is an...


For Audi A6 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
The fuse for the radio is no.# 37 fuse: F37 (20A - yellow colour). See picture below:


3749d67.jpg



There is a second fuse on the back of the radio, (10A - red colour), but you have to pull the unit to check & change it. This is only course of action. You need special Audi radio extracting tools, (two radio keys).

IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit. 5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Aug 29, 2010 | 2002 Audi A6

1 Answer

Turn off oil change light


REMOVE THE LEFT SIDE FUSE PANEL ON DRIVER SIDE.THE FUSE PANEL ON THE SIDE OF INSTRUMENT PANEL LOOK FOR A RED RESET BUTTON.WITH IGNITION SWITCH ON POSITION WITH ENGINE OFF.PRESS AND HOLD RESET BUTTON FOR 5 SECONDS.YOU HEAR A CHIME NOISE THE OIL SERVICE LIGHT WILL START BLINKING AND GO OUT THEN YOUR OIL SERVICE LIGHT IS RESET.

May 20, 2010 | 2001 Oldsmobile Alero

1 Answer

My dodge durango(2003) shut off on me when i was driving yesterday. Engine cranks but doesn't start. Relays and fuses are all good. any ideas?


It sounds like the fuel pump has failed, I'd start by checking the fuel pressure. Turn everything off so you hear whether on not the fuel pump runs when you turn the key to "on". The pump should run for 3-5 seconds and the stop and it won't start running again, until you turn the key to "start".

Dec 27, 2009 | 2003 Dodge Durango

2 Answers

Im tryin to find the ins fuse on my 1993 Sl2 saturn


Do not know what an INS fuse is but the 90s saturns I owned, 3 of them, had a fuse panel just to the left of the front passenger's left knee. pull open the panel just to the front of the console, it is held on with velcro.

Nov 18, 2009 | 1993 Saturn SL2

2 Answers

The drivers side window auto up/down quit


1. Start the car and leave it idle.
2. Hold the window button down all the way, until the window is completely down.
3. Let go and push it down again and hold the window button for 2 to 3 seconds then let go. (You should be able to hear or feel (very faintly) the motor/sensor reset.)
4. Pull up on the window button and roll the window up until it is all the way up, when it is up let go.
5. Pull the button up again for 2 to 3 seconds. (You should be able to hear or feel (very faintly) the motor/sensor reset.)

Nov 02, 2009 | 2008 Honda Pilot

1 Answer

We purchased a 03 lincoln lsand need to reset the keyless entry


1. Sit in the vehicle driver's seat.
2. Remove the ignition key from the ignition lock cylinder.
3. Close all of the vehicle's doors.
4. Remove the MALL PGM fuse from the fuse panel. Or reset the fuse which controls your keyless remote.
5. Turn the ignition lock cylinder to the ACC position.
6. Turn the ignition lock cylinder OFF, then back to ACC within 1 second.
7. Open and then close any vehicle door. You will hear a chime when the
remote control door lock receiver enters the programming/diagnostic mode. If
you do not hear a chime, start again at step 1.

This is an important fact here:

After 7 seconds, you may hear a chime confirming successful synchronization.
After approximately 14 seconds, you will hear a chime confirming successful
programming.

8. Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for
14 seconds.
9. Repeat step 8 in order to program each additional transmitter.
10. Remove the ignition key from the ignition lock cylinder.
11. Install the MALL PGM fuse back into the fuse panel.

This is important as well:
Once the keyless entry receiver enters the programming/diagnostic mode, the
programming of the first transmitter erases all previous transmitter
programming information. You must then program all of the transmitters.
Program only 1 vehicle remote control door lock receiver at a time. If you
program multiple receivers simultaneously, the same transmitter could
possibly be programmed to more than 1 remote control door lock receiver

The fuse should be in your fuse block of your vehicle.

May 25, 2009 | 2003 Lincoln LS

2 Answers

Honda Odyssey doors


I read about this issue while I was looking for a fix to mine. Try the following:

Remove fuse #13 for 30 seconds or more from the passenger side fusebox. This will reset the door and the clock.

OR

1.) Disable the power door switch on the left dashboard.
2.) Remove the power door fuses located under the front passenger leg area.
3.) Manually open and close both sliding doors.
4.) Restore the power door fuses located under the front passenger leg area.
5.) Enable the power door switch on the left dashboard.
6.) Try opening the sliding doors.


http://www.topix.com/forum/autos/honda-odyssey/TD1QRDMAQ28J8EDA0

Sep 03, 2008 | 2002 Honda Odyssey

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...