Question about 2002 GMC Sierra 2500HD

1 Answer

How do I remove the front drive shaft on a 2002 GMC 2500HD crew cab

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 142 Answers

Remove the 4 bolts holding the front u-joint on, now on the transfer case remove the factory zip tie on the back of the rubber boot, pry the rubber boot forward and simple pull the driveline out may take a hammer if it a high milage unit

Posted on Sep 22, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How many u joints are on a 2004 gmc 2500 had 4wd

At least 4. 1 on each end of the 2 drive shafts. There may be a middle one especially if ext. Cab/crew cab/ long bed.

Jul 19, 2016 | GMC Cars & Trucks

1 Answer

Where is the cabin filter on a sierra 2011 crew cab truck

Behind glove box or under front cowl-front of windshield w wiper motor area

Aug 28, 2014 | 2011 GMC Sierra 2500HD

1 Answer

How to replace a carrier bearing on 2002 gmc extended cap

Usually you remove the drive shaft, then unbolt the carrier from the frame. The drive shaft slips into the bearing.

Aug 02, 2012 | 2002 GMC Sonoma Extended Cab

1 Answer

Have a 2001 gmc sierra in4wd auto and front wheels locked up

Those trucks have a lot of problems with the transfer case. An indication of that would have been a clicking or rhythmic noise coming from under the vehicle before the wheels locked. If you don't use 4wd you can always remove the front axles or intermediate drive shaft. That would only be if you want to avoid replacing the costly transfer case.

Jan 04, 2012 | 2001 GMC Sierra Crew Cab

1 Answer

Chevrolet 2002 crew cab HD 4x4. Any suggestions

i have a 04 sierra 2500 hd, i put a spectre cold air intake and it boosted my economy to 11 city 16 hway and it was only 150 at autozone

Mar 21, 2010 | 2007 Chevrolet Silverado 2500HD

1 Answer

I'm getting 13.2 mpg on my 03 6.0 1500 hd. Is

Pretty much...had a 2006 Chev 2500HD Crew Cab 4X4 w/6.0; got 12mpg regularly...which is why it's someone else's truck now. Have a 03 1500 GMC 5.3 Ext Cab now; get 18-21 mpg. Sweet!

Feb 09, 2010 | 2003 GMC Sierra 1500

1 Answer

2004 Silverado crew cab has rattle around steering

If you feel this rattle while driving at low speed or turning at low speed it is likely a worn out steering shaft coupler, it is very common.

Oct 24, 2009 | 2004 Chevrolet Silverado 2500HD

3 Answers

1999 GMC 3500 crew cab, 8' bed we high centered

Are you speaking of the cairrer bearing? if so you can unblot it or if it's rivited grind off the rounded heads then with a hammer and punch punch out rivots or bolts. once out go to a junk yard and see if you can find a used undamaged support. You will have to drop the driveline to remove it. If you need help finding a replacement part let me know and I will get back to you on the price of the part.

Sep 20, 2009 | 1999 GMC Sierra

1 Answer

What is speaker size front and rear in 2002 GMC crew cab?

Fronts are 6.5, rear passenger doors are 5.1/4, and the very rear im still trying to figure out...

Jun 29, 2009 | 2002 GMC Yukon Denali

Not finding what you are looking for?
Cars & Trucks Logo

943 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides