Question about 2000 Buick LeSabre

1 Answer

2000 Buick LeSabre rear window tint bubbling

The window tint on the rear window is bubbling and making seeing through the mirror very difficult. How would this be repaired?

Posted by on

  • Kenneth Rohm Aug 01, 2009

    Thanks for the quick response-that's what I was afraid of.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,596 Answers

Once it Gets to This Extreem It Needs to Be REMOVED, If you have REAR DEFROSTER Lines in it , It Must be Done Carefully so as NOT to Cut the Defrost Copper Lines. It Must Be Peeled Off In As Large of Peices as Possible, And Residual Glue Can Be Removed With ( DECAL REMOVER) < It Can be Found @ Paint Stores. This Is The ONLY thing that Can Be Done With TINT Once it Becomes BUBBLED Like that, And It is No FUN Removing it, Unless You Want it RE-Tinted, Tint Shops Have there Own Method of Removal, Whtch is Basicly the same as I Have Discribed. I Hope this Sheds Some Light On You Problem, LoL No Pun Intended. Have A Nice Weekend!

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers rear veiw mirror is turning yellow 2000 buick lasabre


fault in the coating on the glass, they are relatively cheap to replace unless you have the map lights, in which case they are about $20 at a Junk yard

Sep 28, 2011 | 2000 Buick LeSabre

Tip

How To Install Replace Rear Power Window Regulator Buick LeSabre 00-05...


How To Install Replace Rear Power Window Regulator Buick LeSabre 00-05 1AAuto.com


on May 08, 2012 | 2000 Buick LeSabre

1 Answer

My glass mirror only is missing on my 2000 buick lesabre what can I do?


I assume you are talking about the rear view mirror inside the vehicle. Did it fall down or is it actually missing. Seeing as you said missing - Buy a replacement mirror and buy a package or rear view mirror adhesive that contains glue and an activator. Follow directions on package. If it fell down, follow steps other than buying a new mirror.

Mar 26, 2011 | Buick LeSabre Cars & Trucks

1 Answer

I have a Buick lesabre 2000 on the rear view mirror it has symbols for farenheit and celcius so how do I display the temperature?


Hello: There is a small hole on the bottom of the mirror housing, stick a wire about the size of a large paper clip and push and you will be able to scroll through different selections.

Feb 14, 2011 | 2000 Buick LeSabre

1 Answer

The right rear window will not go up or down how do i fix that .It is a buick 2000 lesabre


first you have to check your fuses, but if the rest work, then you might be looking into a failed motor or window regulator. if fuses are ok then youre going to have to remove the rear door panel and disconnect the window motor and connect a test light to the harness and have someone depress the switch and see if the light turns on, if it does then your motor is the problem, if not then your door switch may need to be replaced.

Jul 16, 2010 | 2000 Buick LeSabre

2 Answers

Locate canister purge solenoid for 2000 Buick lesebra


The evaporative canister purge valve is found between the upper intake manifold and the rear valve cover.

Nov 01, 2009 | 2000 Buick LeSabre

1 Answer

2000 buick LeSabre - rear leveling system problems


The rear leveling trip switch is located on driver's side near rear air shock on the frame. Check for leaks in air line.

Oct 10, 2009 | 2000 Buick LeSabre

1 Answer

2002 buick lesabre custom


check through your fuse box and see if you have any blown fuses hope this helps regards JIm

Mar 28, 2009 | 2000 Buick LeSabre

Not finding what you are looking for?
2000 Buick LeSabre Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...