Question about 1991 Toyota Tercel

2 Answers

When I am stopped at a red light, drive thru, etc. car tries to take off even while clutch is depressed. 91' Toyota Tercel 4 sp tranny

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Toyota Master
  • 2,432 Answers

If the master cylinder is not loosing fluid the fault is the master cylinder , either worn buckets or pitted cylinder letting the fluid escape under pressure , no fluid is lost,

Posted on Sep 04, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Does the clutch pedal feel any harder or softer than ussual?it could be the clutch and pressure plate are worn or hopefully just that the master or slave cylinder is leaking.The master cylinder is under the hood opposite side to the steering wheel and slave cylinder at the gearbox

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What kind of transmission oil is used on 91 toyota tercel


80w 90 gear oil is used in the manual transmission. DO NOT use 10w30 10w40 etc etc as these are motor oils and NOT transmission (gear) oil.

Nov 09, 2012 | 1991 Toyota Tercel

1 Answer

I have a 1997 Pontiac grand am with a 5 sp. tranny. It has a 2.4 dohc quad 4 motor. The clutch just this weekend decided to stay on the floor when depressed while shifting. making it almost impossible to...


You really need to say more?
Of the 3 types of clutch linkage, rod, cable, and hydraulic, and can totally fail, bind, or there could be a failure inside the clutch itself, like the pressure plate.
You need to say whether the back pressure totally went away, if the pedal is just not moving freely, etc.
But certainly do not try to drive it at all.

Feb 14, 2010 | 1997 Pontiac Grand Am

1 Answer

94 tercel 4 speed shift fine, but transmission will not engage.


have you checked the fluid gear oil itself 1st hmmm would you elaborate on this for me is the linkage connected and have you done any work to the said vehicle prior or just one day woke up and this is the issue

Jul 03, 2009 | 1994 Toyota Tercel

1 Answer

Transmission won't engage in Toyota Tercel


pop off the cap on your clutch reservoir, if it's empty fill it up, leave the cap off, and then pump the clutch 20 times to try to get air out, that should work.

Jun 05, 2009 | 1994 Toyota Tercel

1 Answer

Clutch won't engage


There is a problem with the pressure plate spring or possibly the throwout bearing is bound up,you should be able to pull the rubber boot from around the clutch fork and have someone depress the pedal,you should be able to see if it's a problem with the bearing.Unfortunatly the trans is probably going to have to caome off.

May 25, 2009 | 1991 Toyota Pickup

1 Answer

91' Toyota Pickup clutch not depressing/stuck.


dude under truck left hand sideof tranny, is your clutch slave cylinder, remove the hydraulic line, the two mount bolts. replace the slave cylndr. you got clutch !!!!

ps i dont recall there being a bleed valve. it should bleed by gravity


james ray

Apr 13, 2009 | 2004 Toyota Highlander

3 Answers

1989 Toyota Tercel 5 speed stick trouble starting


sounds like your clutch safety switch, the switch that keeps the vehicle from starting unless clutch pedal is depressed, is not working.. the correct thing to do would be to buy a new one.. on the other hand cutting the wires and wiring them together will work just fine.. but keep in mind the vehicle will then start in gear with out pushing in the clutch pedal so use extra precaution when starting if you decide to take this route.. hope i could help

Dec 14, 2008 | 1989 Toyota Tercel Liftback

Not finding what you are looking for?
1991 Toyota Tercel Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...