- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have the wrong code. Hold preset buttons #1 & #6 down, turn on radio. Keep holding down buttons, record 1st 4, then 2nd 4, of radio serial number. Either register your car on-line with Honda to get the code or go to a Honda dealer.
hi i would take a look at the inside fuse panel in case a multiplexer box is clipped on the back of int fuse panel u r cluster is missing power or ground in u honda manual under fuses it should give u description of function and a fuse number should point u in the right direction danny
On my 2007 Honda CR-V The DRL code appeared on the dash board. Additionally I had only one high beam (on the passenger side); both low beams were fine, but I did not have a Daytime Running Light on the drivers side. The DRL code was really misleading because the real problem was that the high beam element in the headlight bulb was burned out. Note that the daytime running light is not a seperate bulb -- it is the high beam element which is powered at a low voltage. Once I replaced the head light bulb everything worked fine and the DRL code on the dash board was gone. So if the DRL message appears what you really need to do is replace the headlight bulb (there are YouTube videos which show how to do this - but search for headlight replacement, not for DRL fix). Be careful not to touch the new bulb with you hands since premature burnout can occur from the grease off your skin. I got my bulb from Wal-Mart for $8.88 (it's a 9003/HB2 for the 2007 CR-V) -- that's a pretty cheap fix.
If this is a manual trans replace the reverse light switch on the transmission, if it is an auto replace the range selector switch on the transmission.
×