Question about 1999 Dodge Durango

1 Answer

High rpm shifting, check engine light...

In every gear it take all the way in between 3000-4000rpm to shift, you can let off the gas and it'll shift on its own. Loud whinning/air flow when driving... check engine light is on... some one was telling me about the sensor for the trani that tells the speed??? could possibly be the problem, is that a at home fix or has to be hundreds at the shop...?

Posted by on

  • mary_ultsch Aug 01, 2009

    Thank you for the info, This single mom really appreciates it...

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 123 Answers

Im not sure what type of autoparts stores are available in your area but most have OBD machines that they can use for free to determine why ur check engine light is on; they will even give you a printout of the problems detected. I would go there first to make sure that it is your tranny speed module. If it is they can usually help wlak you thru the process to replace or you can buy the Haynes manual for that vehicle which will give you step by step replacement instructions on it

Posted on Aug 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 Chrysler Sebring wont shift correctly


this is limp mode most likely. is there a check engine light or abs light? if so, have code read. MOst likely its a speed sensor.

Feb 23, 2014 | 2005 Chrysler Sebring Sedan

1 Answer

2005 chrysler Sebring occasionally wont shift gears or acts like its in neutral


run fault codes and check for TCM problem . Change the fluid and clean the filter. Have a pressure test done on the box to check for internal mechanical problems. While the pan is off have the bands and clutch pack adjustment checked.

Feb 09, 2014 | Chrysler Sebring Cars & Trucks

1 Answer

Takes time shifting, and won't shift into high gear unless you gas on it.


May check fluid level and if low would more than likely indicate a leak. could also be a sensor that controls the shifting. does check engine light come on and if so,this could indicate a bad sensor.

Aug 12, 2012 | 2001 Kia Sportage

1 Answer

Rpms runnning over 2000 jeep cherokee laredo 1997


Maybe the Throttle Position Sensor (TPS) if the computer thinks it is all the way to the floor then the gears would not shift until the engine RPM is real high. Also would not be able to determine the car is supposed to be idling. Do you have a check engine light? If you do this may come up on a scanner.

Feb 12, 2012 | 1997 Jeep Grand Cherokee

1 Answer

Check transmission light flashes it shifts into higher gear at very high rpm and will not downshift but once engine is off and parked it goes back to low gear . also when it roughly goes to high gear it...


problem is internal ,not difficult to repair ,its a solonoid on the mechanism inside the sump but you may not be able to buy the parts only an exchange gearbox complete

Mar 11, 2010 | 1995 Isuzu Rodeo

1 Answer

My H2 2003 hard or take time to shift when running to 35+ MPH


check your tranny fluid and filter. you may have a clog some where or could be low on tranny fluid.

Jul 25, 2009 | Hummer H2 Cars & Trucks

2 Answers

2000 GMC Jimmy's RPM's too high when shifting


Replace the shift solenoids (there are two) inside the tranny, just in front of and to the right of the tranny filter.

Mar 21, 2009 | 2000 GMC Jimmy

Not finding what you are looking for?
1999 Dodge Durango Logo

Related Topics:

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...