Question about 2000 Chevrolet Blazer

1 Answer

On my blazer it has the push button 4x4 on it and it wont go into 4x4 hi but will go in 4 low.what could be the problem with it.help please

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 227 Answers

It could be as simple as the switch its self. I know that these suvs have had enough problems that ou can get the after market 4x4 swtich at your local O'riellys. Check it out. This is the first step to fixing what might be a very expensive repair.

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 BLAZER STUCK IN 4 HI, PUSH ANY OTHER BUTTONS AND THEY JUST BLINK. ANY HELP


It could be any number of things...easiest to most complicated: The buttons on the dash may be bad. The 4x4 computer inside of the right kick panel on the passenger's side. The shift motor on the driver's side of the transmission, to start with. I'd be willing to bet that it's the buttons themselves. I hope I've helped. If so, please leave a testimonial and rate my assistance to help others find this answer in a similar situation. Thanks for using Fixya.

Feb 11, 2011 | 1998 Chevrolet Blazer

1 Answer

My 99 blazer is push button 4x4 the lights on the 4 low 4high and 2 high quit working don't have 4 wheel drive anymore have roaring sound coming from front in when going any rate of speed.


I have seen the switch in the dash go bad and also the 4x4 module in the passenger side kick panel will collect moisture you can look at the plug in of the harness for green corossion.

Oct 14, 2010 | 1999 Chevrolet Blazer

1 Answer

How to get 99 blazer out of 4 wdlo to 2 wdr hi when push button wont work.


This has a Borg Warner 1350 series transfur cast. cLimb under the truck with a 10 mm socket and rachet and remove the 3 bolts holding the electric transfur case motor, Looks like a soda can. Once removed ,you will see what looks like a try-angle shaft turn it twards the right. You have just moved the low-high fork. Put the motor back on and pull the 4x4 fuse until you change the 4x4 motor

Jun 19, 2010 | 1999 Chevrolet Blazer

2 Answers

2004 chevy silverado 1500 4 wheel drive wont work..


try selecting from nutreul or less then 3km

Feb 02, 2010 | 2003 GMC Sierra

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

2 Answers

I have a 1997 4x4 Blazer that wont go into 4x4.


just had simular prob.. check front diff for fluids, check actuator, and also there is a switch on the top of your transfer case . all else fails, have vehi. on jack stands (all 4 tires off the ground) start, hold brake, push button,and have someone under to watch cable ect. (""do not put in gear or give gas while doing this"")

Dec 25, 2008 | 1997 Chevrolet Blazer

3 Answers

Wont swictch back into 2 wheel drive from 4 wheel hi


you could have a split vaccume line goin to the actuater switch that operats the 4 wheel drive under neath the battery box.

Dec 17, 2008 | 1999 Chevrolet Blazer

3 Answers

Transfer case motor for push button 4x4


i have a 1993 blazer 4.3 w code 4x4 with a 4L60 E . my truck wouldn;t go in 4 hi or low. so i changed the transfer case motor and it works fine now. If you turn the ignition key to on but not crank the engine and open the driver door and push 4 hi button, you should hear the transfer case motor cycle for 3 or 4 seconds every time you push button and the light will flash until it goes in 4wd If the 4 hi button light doesn't flash during cycle then it could be a bad switch. if the transfer case motor won't cycle it could be a fuse or a bad transfer case motor . Hope this answers your question.
pgale89

Dec 16, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

1994 chevy s10 blazer 4x4 push button type


small sylinoid on the top of the transfer case needs replaced. easy to do. it has three vacumelines going to it just trun out and replace like a bolt.

Dec 10, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

4-wheel high problem


reset the 4x4 computer by pulling out the courtesy lamp fuse and the ATC fuse for 1 minute then reinstall both fuses then cycle the key on and off 5 times. if this works please rate.

Nov 17, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...