Question about 2001 Chevrolet Silverado 1500

1 Answer

The abs and emergency brake light come on periodically

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 227 Answers

This usually means its time to get your brakes changed. It also happens when your running low on brake fluid. It might not be low enough to stay on, but when the road gets rough the fluid is moving around enough to trigger your light. Also make sure your E brake is all the off. It might be close enough to the switch that vibration is causing it to make contact flashing your light. If you experience this during heavy braking then your running low on both fluid and maybe even pads.

Posted on Aug 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause the Emergency Brake light to not go off when the emergency light is released? What causes the ABS warning light to come on?


When I had that problem with the emergency light it was the sensor for emergency brake
The abs and brakes sounds like you are loosing pressure in the system

Apr 18, 2015 | 2004 Toyota Prius

2 Answers

Abs and brake lights on


Thats a big possibility. The abs light is on telling the driver the abs system is disabled. And the regular brake light could be on because the parking brake is not released.

Jan 22, 2014 | 1999 GMC Jimmy

1 Answer

Steady brake light on dash


i wonder if you mean abs light i f so loosen and re tighten .often no contact makes the abs light come on .other wise release emergency brake perhaps the peddle got pushes a couple of clicks enough to make light come on but not enough to look like it is applied.try emergency brake first push then release with handle.you wouldnt beleive how many people this happenes to .

Jan 19, 2013 | 2001 Chevrolet Silverado 2500

1 Answer

Where is the fuse for the 2002 highlander ABS


The fuse for the ABS in a 2002 Highlander is in the black plastic covered box under the hood. If you take the fuse out, the ABS warning light and the emergency brake warning light will illuminate on your dashboard. The brakes will work as if you never had ABS, and the car will chime when you first start off if the emergency brakes are on.

Aug 23, 2012 | 2002 Toyota Highlander

1 Answer

Will the abs light come on if the emergency brake is burnt out


The abs and traction both work off the speed sensors. If you burnt out your brakes chances are the speed sensors will be dirty from the debris dust metal filings etc from brakes. You need to remove the wheels and clean the sensors located just behind the discs use a brake and clutch cleaner aerosol and ideally an airline to blow out the dust and dirt.
The speed sensors are magnetic so metal filings easily stick to them and therfore give a false reading.

Aug 06, 2012 | 2006 Hummer H3

1 Answer

2001 kia optima lurches and emergency brake light and abs light go on


you must go to the repair shop for test with the computer and Scanner.

God bless you

Jun 22, 2012 | Cars & Trucks

2 Answers

Abs light on in my ford ranger 1999


ABS light tells you that there is some problem with the brake system like you have forgot to release the emergency brake or its time for you to change the brake fluid. Ford recommends to change the brake fluid every year.If you have recently refilled the brake fluid , check for any leaks.Abs light indicates that your braking system needs to be serviced.

Feb 15, 2011 | Ford Ranger Cars & Trucks

3 Answers

Both brake and abs lights are on. I've replaced both front wheel hubs, and checked all fuses.cant seem to locate the problem


you have an ABS code in the ABS computer. You most likely damaged an ABS sensor. even after myouo fix this you will need to get the code cleared
NOTE: autozone wont be able to access the ABS computer.

Aug 03, 2009 | 2001 GMC Sierra 1500HD

1 Answer

ABS and emergency brake light on


try bleeding the system and if you went 4x4ing you may have knocked off a wheel sensor.

Jun 28, 2009 | 1995 Nissan Pathfinder

1 Answer

ABS Light On


you can take it to autozone they will check it for free and tell you what the problem is and which sensor and which wheel its on ...that way a shop cant tell you you need other parts you dont need. hopes this helps.........

Dec 10, 2008 | 1992 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...