Question about 2004 Ford F150

1 Answer

Drivers side seatbelt connected When truck is

Drivers side seatbelt is connected. When truck is moving, the seatbelt warning light flashes and chimes approx 12 times. Disconnecting seatbelt and reattaching it does not solve the issue. It still flashes the warning light and chimes. Eventually it does stop but not after about 5 to 10 minutes time have passed. By connecting the seatbelt BEFORE I start the truck sometimes solves the problem. However, I have a remote starter and when activated still produces the warnng and chiming even after I connected the seatbelt.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 37 Answers

Sensor in the seat belt bukle needs to be replaced

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 chevy Trailblazer seat belt chime doesnt work ?


Lots of owners would like to kill the seatbelt warning if they could.

If the car is fitted with airbags and connected pyrotechnic seatbelt retractors as part of the SRS fault finding in that area can be potentially explosive for the inexperienced and should not be undertaken without taking sensible precautions and access to a wiring diagram to ensure the correct wires are being tested.

The chime might not be working because the switch within the catch is faulty or stuck. The manufacturer will probably suggest such things as disconnecting the vehicle battery and waiting for half an hour before disconnecting the pyrotechnic unit and proceeding to check the circuit wiring.

May 30, 2016 | 2004 Chevrolet TrailBlazer

2 Answers

Disable seatbelt chimes,will not go off, since driver door been replaced.


Sounds like the door switch is not switching or not connected. Sometimes the switch is external in the door jamb/closing area, sometimes it is part of the door catch. Maybe check if the door light on the dash stays on, also if the interior light works on door setting.

Jun 24, 2015 | Cars & Trucks

1 Answer

2005 town and country touring i want to disconnect the seatbelt warning light and chime?


1. Turn the ignition switch to the off position and buckle the seat belt
2. Turn the ignition switch to run (engine does not need to be running), wait for the seat belt light to turn off.
3. Within 60 seconds, unbuckle and rebuckle the drivers seat belt at least 3 times, ending with the seat belt buckled.
4. Turn the ignition key to the off position. A single chime will sound to signify that you have successfully completed the programming.

It can be reactivated by repeating these steps.

The alert will be deactivated but the warning light will continue to stay on will the belt is unfastened.

Feb 13, 2013 | 2005 Chrysler Town & Country

2 Answers

How to stop the chime on seatbelt on 2005 dodge dakota


Are you wearing your seatbelt when it chimes? If not, wearing your seatbelt will shut the chime off. If it chimes when you have it on, the switch inside the seatbelt locking mechanism may not be functioning properly, and the mechanism may need replaced. Look at the wiring next to your seat and follow the wires that leave the locking mechanism. They travel under the seat and plug into a wiring connector near the rear of the seat. Make sure it is plugged in and check the wires for damage.

Oct 17, 2012 | 2005 Dodge Dakota

1 Answer

09 town & country chime ringing seatbelt always on


If it's your tire pressure monitoring system, then you may have a low tire. The tpms light in the dash will be on too. As the vehicle is moving, the tires generate heat which will increase the temperature inside the tire, which will also increase the pressure inside the tire, which will turn the tpms light off. The light only comes on when the tire is low so add air to the tires to bring them to the manufacturers recommended tire pressure on the placard on your drivers door or drivers door frame. I do not know of any tpms system that chime when a low tire situation is present. If it's actually the seatbelt causing the chime, then there should be a seatbelt light that comes on in the dash as well. The seatbelt sensor may be malfunctioning. Otherwise, the chime may be due to another issue. Check your owners manual for possible causes.

Jul 08, 2012 | 2009 Chrysler Town and Country

2 Answers

Hi have a 97 olds88 seatbelt chime will not quit.stays on with seatbelt hooked up.


The sensor in the seatbelt is definatly not working, Sounds like an expensive repair for just a chime,
as a joke I would find the chime and unhook it. But seriously you might be able to find the wiring under the seat for the seatbelt and unplug it depending on the year but after 20 minutes of research all seatbelt replacements ive found say they come without electronic sensor anyway.
Good luck and hope I helped you out some....
I tried my best!
Larry

Mar 25, 2011 | 1997 Oldsmobile 88

2 Answers

Is there a passcode or sequence to disable the


As far as I know that seat belt warning chime and light is there for your safety and protection, it should not be bypassed in any way.
There is no by pass seqwuence or code to eliminate this safety device.
Buckle up, its the law.

May 09, 2010 | 2002 Ford Mustang

1 Answer

Warning light came on this morning, figure of a man with the seatbelt. What does this indicate?


This is the seatbelt indicator, its not seeing that your seatbelt is fastened ifthe light stays on and the chime keeps going off.

There is a switch inthe seatbelt that closes when the seatbelt is buckled, and if not, thelight stays on and the chime goes off.

There are a couple reasons thiscould happen. It could be a wiring issue going to the seatbelt buckle,or more likely the buckle itself. Your truck is pretty new, so if youare under 36,000 miles the repair would normally be covered underwarranty.

Also, I suggest check the Repair Manual for Jeep-WK-Grand-Cherokee-Section-08O-Restraints (page 473 and next, for Seat Belt)

Hope helps with this (remember rated this) Good luck.

Jan 21, 2010 | 2006 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Ford F150 Logo

754 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...