Question about 1997 Plymouth Grand Voyager

1 Answer

My passenger side door window made a "pop" then the window slid down. I can't find what all the cables are about and how they operate the window. Help!

Posted by on

  • wapitidoc Aug 01, 2009

    It would be helpful if I could have a routing diagram of the cable and where it attaches at the ends. Also is there an easy way to get behind the door panel and hav access to the cable and rollers.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

The bottom of the window rail may have fallen off. You can remove all the screws of the door panel Remove window & lock controls by prying them up. Then take a big flat-head screwdriver and pry directly next to the plastic pins that hold panel on the door. Then look inside and you will see the bottom of the window, You will see the guide that holds window in place. See if and how it can be reattached. Let me know how it goes.

Posted on Aug 01, 2009

  • Nate Stansfield
    Nate Stansfield Aug 01, 2009

    Pry off door rail.

  • Nate Stansfield
    Nate Stansfield Aug 01, 2009

    Go to this site for pics and directions:




1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2008 Colorado passenger window will go up and down with drivers control switch, but not using passenger side switch. Replaced switch on passenger side with no changes...

Lockout Switch Feature
The window lockout switch, when closed, provides power to the passenger door switches enabling normal window operation and when the lockout switch is open, power is cut to the passenger door switches disabling window operation. Normal window operation is still available from the driver master control.

Jun 29, 2017 | Cars & Trucks

1 Answer

How do I remove the door panel from the front passenger side of my dodge avenger 2010. I don't see any screws. Does it just pull off?

Try google images but you will likely need a special jemmy type tool from a parts house or accessory shop. There are probably pop studs located all around the edge of the door panel and will need care to release, thats what the tool is for. The window mechanism will have jumped its track or if cable operated come adrift. All will be revealed. try for help

Sep 27, 2016 | 2010 Dodge Avenger

1 Answer

Take off passenger side door panel 2006 honda pilot

This procedure will require one special tool from an auto parts dealer to remove the window crank, door handle release, and to get behind the panel to pop the keepers out that are attached to the back of panel and just press into the holes in the door. Slide this tool in between the panel and door, find position of each keeper, and pop them out of the hole. Use the tool to push the spring clips from the window crank and slid the crank handle off, then remove the panel. If has power windows, just unplug the wire harness from the buttons.

Sep 24, 2014 | 2006 Honda Pilot

1 Answer

How do I realign the passenger side window?


NOTE: Window glass must be operable in order to remove door assembly carrier. Any malfunction that prevents the window (manual or power) from being lowered must be corrected before proceeding.

  • Remove door trim panel.
  • Pry out sealing plugs in door assembly carrier to gain access to window glass securing bolts.
  • Lower window until window glass securing bolts are accessible.
If the power window motor is not working it can be renmoved to allow the window to be slid down.

  • Loosen window glass securing bolts and carefully press glass securing clamps apart.
If glass is being replaced due to breakage, remove door assembly carrier and remove broken shards of glass to prevent rattling noises in door.

  • Carefully lower the window regulator.
  • Lift window glass up and pivot forward, starting at the taller end of the glass. Pivot forward towards the direction of the side mirror.
  • Place removed window glass in a secure location.

  • Slide forward part of window glass into opening and pivot glass downward, reversing the removal proceedure.
  • Raise window regulator until window glass securing bolts are visible in access holes on door assembly carrier.
  • Gently press window in the direction of the door latch or highest part of glass and tighten securing clamp bolts.
  • Remainder of installation is the reverse of disassembly.
  • Check operation of window before final installation of door trim panel.
Window glass securing bolts...........10Nm (89in-lb)

Jun 25, 2010 | 2000 Volkswagen Beetle

2 Answers

Passenger side window in 2004 Honda Odyssey: The cable is no longer connected to the rail. Where does the cable reattach to the rail? It's hard to see inside the frame of the door.

This tells me the regulator is broken,the cable may have poped or a plastic wheel guide broke, you will need to replace the regulator, heres a picture to help explain what i'm talking about,fb9a2c2.jpg

Jun 21, 2010 | 2004 Honda Odyssey

1 Answer

My passenger side power window has slipped off the track. How to repair it?

there are two possibilites there is a retainer chain connector made of plastic links it it fell down and does not come up it could be there broken in door well frame ...replace at dealer only .. IF its comming up crooked you can remove the door panel by removing the window handle or any other obstrucion to this access panel See if it has just slid off at the bottom of the track

these panels are testy they pop out but rarely go back as easy as they pop off so be patient on re assembly they pop into a small hole they are soft plastic and metal retainer so they can bend as well

Jun 15, 2010 | 1993 Jeep Grand Cherokee

2 Answers

Malfuntioning driver's side power window upon opening door lever.

get it to the dealer asap.

you definitely need to take apart the door. There's something not right inside.

May 24, 2009 | 2002 Porsche 911

Not finding what you are looking for?
1997 Plymouth Grand Voyager Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides