Question about 1992 Dodge Daytona

Open Question

My car will not start i turn the key and it turns over it just will not start... what could the problem be?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Occasionally, about every 6 to 8 times tried, the engine will turn but not start. If I turn the key off for about 3 seconds, it usually starts within a few turns. Do you know what can cause this?


A year, make, model, and engine size would help but I will through this at you.

Instead of just trying to start the car turn the key to the run position and wait 3 seconds. Turn the key off and immediately turn the key back to the run position and wait another 3 seconds. Turn the key off then try to start. Do this every time you try to start the car. If you symptom never occurs when you start the vehicle like this than I would suggest taking a closer look at the fuel system.

Oct 10, 2016 | Cars & Trucks

1 Answer

Truck will not start, wait to start warning light is out?


Please provide more information.

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but there is nothing..." or

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but there only a ticking/clicking sound..." or

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but the engine only turns over and doesn't catch."

Jan 06, 2015 | Cars & Trucks

1 Answer

When key is turned on and gauges go crazy, car won't start, when key is turned and gauges are normal car will start


Envoy ignition switches are known for having intermittent problems and causing strange indications in the truck. Have the ignition switch changed and I'm pretty sure your problems will be solved.

Jun 20, 2012 | 2004 GMC Envoy

1 Answer

Grand am wont start. it is turning over tho. i tried the security fix (leaving it on for 10-20 mins, then off and trying) but it still won't start.


Hello: Try this, Turn key on, try to start, let k/switch come back to run, let set for 10min(security light out) turn key off 10sec, turnkey back on let set 10min, turn key off 10 sec, turn key on let set 10min. turn key off 10sec. turn key on start car if it doesn't start and the security light is flashing you have a passlock problem and it will require a new lock cylinder assembly and the above learn procedure.

Jan 27, 2011 | 2001 Pontiac Grand Am SE

1 Answer

I just put a new steering column in my 200 saturn sl2 because my ignition lock was messed up. Now when whe try to start the car, it will start up but immediately shut off and then the security light...


Hello: Will try to give you instructions: Attempt to start car, leave key on (security light flashing) let set for 10 minutes, After 10 minutes security light out. Turn key off for ten seconds, turn key on, let set for 10 minutes, turn key off for 10 seconds. turn key back on let set 10 minutes, turn key off for ten seconds, the engine should now start and stay running.

Jan 14, 2011 | Saturn SL2 Cars & Trucks

1 Answer

Can't turn key to start car on 2001 jimmy


Have you tried to turn the stearing wheel side to side while turning the key? Sometimes the wheel gets bumped and it locks with the key in the ignition and the added tension won't alow you to turn key unless you turn the wheel from one side to the other.

Aug 24, 2009 | 2001 GMC Jimmy

1 Answer

New ignition switch now car security system locked


ok here you go
make sure the battery is fully charged befor starting
turn ignition to run
attempt to start once then release the key in the run position
let vehicle sit with the key on for ten minutes
the security light should turn off
turn igniton switch off
wait 5 seconds
turn key to run position
let vehicle sit for 10 minutes
turn key off
wait 5 seconds
turn key to run position
let vehicle sit for ten minutes
turn key off
wait more than 6 seconds
and start engine

Jun 14, 2009 | 2001 Chevrolet Monte Carlo

1 Answer

Key stuck in ignition


Be sure its all the way in park or try neutral.Its possible that security system does not recognize the key. Is security light flashing or on steady? Shut all doors and windows,trunk,hood, turn off all accessory's,roll down drivers window, turn key off and remove for at least 1 minute, insert key into ignition, try to start leaving key to run position for 20 minutes, turn key to off,wait 15 seconds, try to start again leaving key to run, wait 20 minutes, turn key off,wait 15 seconds, try to start, again leaving key to run, wait 20 minutes, turn key off, wait 15 seconds, try to start. This should relearn key code. It may relearn after 1 learn cycle and start if system is ok. Hope this helps and that the weather is dry and warm for this procedure! This is not always a fix, but works most of the time.

Jan 25, 2009 | 2006 Chevrolet Monte Carlo

Not finding what you are looking for?
1992 Dodge Daytona Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...