When I push lock, a red light flashes on my key fob. Is there a place in the car I can put the key so the car recognizes the key without a battery?
SOURCE: clio
the key has lost its code. open the doors manually and use the central locking button inside the car. hold it down and keep pressing your key fob. this should re code the key
SOURCE: Immobiliser light flashing and car
Hello, do you know what the locksmith did to get the code on your key? Did anything else flash on the screen when the car would not start. My car is doing the same thing, and my Jaguar dealer is 200 miles away. My screen is showing [Engine Fault, Transmission Fault and DSC Fault]. Any help would be greatly appreciated..
SOURCE: mercedes 1999 c200 key fob
Hello Haq!
Could it be the key just needs re-coding? maybe you are worrying to much as £177 would be about right as that would need coding etc., Try phoning your local Merc dealer or take the key and V5 to them for coding (Hopefully)
Good Luck!
Paul 'W'
Onyer~EDson(:0)~[><
SOURCE: My key fob remote will not unlock car doors but will start car
Here you go.If you can't read it I can email it to you.
SOURCE: key fob lights up but doesn't work even with a new battery
I'm more familiar with Range Rovers and Saab's when it comes to key fobs but if you changed the battery you have to re-program the key fob. If you do not have an owner's manual that can take you through the steps you might want to try: push and hold the lock button on the key fob, put it in the driver's side door and turn to lock. With the button still depressed turn back to open, remove the key and release the button. If this doesn't work check any and all fuses associated with your system and last but not least you could take it to a dealer. Good luck!
Testimonial: "thanks ill try what you've suggested"
241 views
Usually answered in minutes!
×