Question about 1993 Jeep Wrangler

1 Answer

How do I install a driver dide door handle on my

How do I install a driver side door handle on my 93 jeep wrangler S model? Do I have to remove the entire door panel?
Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,674 Answers

Inside handle, no, outside yes, to access nuts/bolts on back side.

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'05 jeep wrangler replacement weather stripping seems too thick, trouble shutting door now


talk to the seller of the replacement and make sure they sent the correct tickness

May 11, 2013 | 2005 Jeep Wrangler

1 Answer

I have a 98 jeep wrangler and the door handle has a mechnical failure. I've purchased a new external door handle but I have no idea how to get the old handle out of the door. Anyone know how to do that?


Hmmm usually change the entire door. From junk yard and rekey it or change cylinder. To remove the handle maybe remove from inside the door.

Dec 29, 2010 | 1998 Jeep Wrangler

1 Answer

HOW TO INSTALL WRANGLER PADDLE HANDLES ON 1990 FULL METAL DOORS


Remove the door panels on the inside of the door. Roll the window up so you can reach the bolts that hold the paddles onto the door skin.

Dec 03, 2009 | 1990 Jeep Wrangler

1 Answer

How do I remove the door panels froma 2003 jeep wrangler


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Jun 25, 2009 | 2003 Jeep Wrangler

1 Answer

Jeep TJ Wrangler Outer door handle removal


The handle is held in place by two vertical wedges on both sides of the handle. To remove just force the wedges up with a hammer and screwdriver (be careful of the glass). Putting them back in is very difficult. I would suggest making the bends or adjustments with it installed so you'll know exactly how much you need. I hope this helps.

Apr 23, 2009 | 1991 Jeep Wrangler

1 Answer

Rattling inside drivers side door panel


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Apr 05, 2009 | 2000 Jeep Wrangler

1 Answer

Need to replace interior driver side door panel on 2003 jeep wrangler, full size doors. how do i get it off?


to remove the door pannel there is 2 screws and then like everything ells on jeep there are little clips that you need to pull off, try removing the screws and then pulling from the interior pannel

Mar 21, 2009 | 2003 Jeep Wrangler

1 Answer

How do I replace the interior LH door handle 97 Jeep Wrangler?


you will need a t-20 or t-15 torx bit driver to remove 2 screws holding the handle this is all that holds them on, on once you have a replacement handle it is easier to remove 2 lower screws on the door panel and unsnap the door panel to loosen it this will allow space making it easier to reinstall new handle just slide each end into the slot and reinsert 2 screws to not fully tighten until door panel is snapped back in. the panel is held on with clips and can be released using plastic pry tool around door panel edges.

Nov 22, 2008 | 1991 Jeep Wrangler

1 Answer

98 Jeep Wrangler door handle won't open door


there is a metal bar inside that clips into the handle they come off all the time there is a plastic clip that hold the 2 together it most likely has fallen off and into the bottom of the door you can put it back together easily if clip cannot be found you can buy them at local parts store for a couple bucks..hope this helps

Nov 21, 2008 | 1998 Jeep Wrangler

Not finding what you are looking for?
1993 Jeep Wrangler Logo

487 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...