Question about Saturn SL

1 Answer

I started the car and it just died. Would not

I started the car and it just died. Would not start. When I put the key in the egnition (and NOT turning the key) you hear a clicking sound comming from the passenger side rear wheel well. Opening and listening in the trunk the clicking is defently comming from the wheel well area. Turning the key to start the car, nothing happens. The interior lights stay bright so I don't think there is a draw on the battery. The radio shuts off when you turn the key to start, the interior lights stay bright, the clicking stops. No other sounds are heard. All other items work in the car. The fan, Headlights, Radio, etc. No Security light is on and all pre ignition lights light like normal before you turn the key to start. Any sugestions?

Posted by on

  • glenntkollar Jul 31, 2009

    Im sorry I should have said my car does not even crank.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 38 Answers

You may be out of gas or have a bad fuel pump

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BMW320I E90 2007 MODEL NOT STARTING


check the fob on the key have it read to make sure its not damaged. key has a chip code in it and it its damaged or come off the ignition barrel reader will not read it and the engine will not start. if the key when checked then would check the reader. make sure its working. most key cutting place's will check your key for free.

Mar 20, 2014 | 2007 BMW 320i E90

1 Answer

Egnition lcoked


As you turn your key to start, at the same time move your steering wheel side to side until it unlocks

Jan 17, 2013 | 2004 Ford Escape

1 Answer

Well i lost my kyes so i broke the egnition so now the security light is flashing and it wont start so i went and got a hole new egnition wiering all the way to the kyes if i just take the old one out and...


The computer wont let you start the car because your key probably had a chip in it. so until you replace the ignition and have a dealer make a new key specific to your truck. ya it wont start.

Jul 31, 2011 | 2001 Chevrolet S-10

1 Answer

I have a 1990 jeep cherokee and it wont start? I


too many variables can cause this and unless you are mechanicaly adept then i can only advise that you call a local mechanic for his verdict

Jul 02, 2010 | 1993 Jeep Grand Cherokee

2 Answers

I posted this a little bit ago but forgot to mention The car would not crank. I started the car and it just dies. Wlould not start or even crank. When I put the key in the egnition (and NOT turning the...


check to make sure yu have 12v at the battery, once you do turn the ignition to start, if nothing, check the fuse and relays that control ignition, if all is good then the click sound is coming from the starter, have the solenoid replace.

Jul 31, 2009 | Saturn SL Cars & Trucks

1 Answer

Fitting new ignition barrel series 3 1996 316i


It is a very small hole in the switch cylinder. About the size of a paperclip or maybe a bit thicker. It is to reset the ignition. If that does not work. you may have to replace the switch. try using aa paperclip or someting to push into the hole. Being vcareful not to force it too much. So it won't break inside.

Feb 06, 2009 | 1996 BMW 318

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...