Question about Ford Taurus

Open Question

How repair headlight switch 1997 ford taurus - Taurus Ford Cars & Trucks

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

RALilja
  • 381 Answers

SOURCE: blown headlight drivers side 2005 ford taurus

There are no screws need to be removed from the headlight bezel as the lamp need be only removed from the rear. On the rear of the headlight unplug the wiring harness, then turn the big hand screw /catch only 1/4 turn and pull out the socket and lamp straight out. then replace the burnt lamp and do the reverse of which you did to get it out.

Posted on Nov 30, 2008

m036_094
  • 107 Answers

SOURCE: 98 ford taurus headlights will not go off

either the headlight relay is stuck on. or the daytime running light module or relay is bad. to confirm find the relay center and switch the headlight relay out with another relay with the same part# on it. there should several in the relay center with the same part #. If this fixes the problem get a replacement relay. if not try switching out the relay for the daytime running lights. if no dice then unplug the daytime running light module.

mike

Posted on Jan 06, 2009

alicantecoli
  • 22156 Answers

SOURCE: leak around oil pressure switch on ford taurus 1994

the internal seal has gone ,renew the switch

Posted on Dec 03, 2009

  • 286 Answers

SOURCE: 1999 ford taurus tail lights, running lights and

You will have to check there is an output voltage from the switch ( suspect plug connector) . If you say the fuses are ok then you will have to try either a relay or fuse box connector . Good luck

Posted on Apr 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace front turn signal on 1997 ford Taurus sho?


remove neither jack car up and crawl under look up and you might see the back of light socket .

Feb 16, 2015 | 1997 Ford Taurus

1 Answer

Daytime headlights are stuck on. Where do i find the module for repair.


i would say your most likely fault here is the drl relay, or the daytime running lamps relay, i would try a replace on that....

Nov 27, 2010 | 1997 Ford Taurus

1 Answer

How do you pull complete headlight assembly on a 1998 ford taurus


How to Replace a Headlight Bulb in a Ford Taurus

The Ford Taurus has one of thelongest production histories of any of Ford's mid- cars. You should check that the headlightson your Ford Taurus are working properly on a regular basis. When one of theheadlight bulbs burn out, replacing it is a simple repair you can performyourself. These steps apply only to the fourth generation Ford Taurus producedafter 2000.

1. Turn off your Ford Taurus, engage the parking brake and remove the keys fromthe ignition before beginning any repairs. Ensure that the headlights are offby double-checking you turned the interior control completely to the offposition. 2. Raise the hood by firstpulling up on the interior hood release latch located under the instrumentpanel on the left of the steering column. Walk around to the front of the car and release the auxiliary latchlocated at the front center of the hood. Raise the hood until the liftcylinders catch and hold the hood open on its own. 3. Unscrew the bolt from theheadlamp assembly by turning it counterclockwise. Use a screwdriver or pliersto pry up the retaining pins enough that you can pull them straight up and outwith either your hands or a pair of pliers. These pins are located at the backof the headlight assembly. 4. Pull the headlight assembly out from the front of the vehicle. Remove the protective dust shieldfrom the electrical connector and bulb assembly by turning it counterclockwiseand pulling it off. 5. Free the bulb assembly by disconnecting the electricalconnector and retaining ring. You can simply pull off the connector to removeit. The retaining ring requires a counterclockwise turn for removal. 6. Take out the old headlight bulb by pulling it straightout from the headlight assembly. 7. Install a new replacement bulb by pushing it straightin with the flat part of the bulb's base facing upward. Be sure that thegrooves in the plastic base of the bulb align properly with those in theheadlight assembly. 8. Reinstall the remaining components of the headlightassembly in reverse order of removal and check that the headlights are workingproperly. Read more: How toReplace a Headlight Bulb in a Ford Taurus ' eHow.com

Nov 10, 2010 | 1998 Ford Taurus

1 Answer

I have a 97 ford taurus and the turn signals in the front work intermittently. And the fuses are OK. Any ideas?


Check the ground wires, they are up by the headlights mounted to the body, black wires if you didn't know

Oct 04, 2010 | 1997 Ford Taurus

1 Answer

1999 ford taurus tail lights, running lights and


You will have to check there is an output voltage from the switch ( suspect plug connector) . If you say the fuses are ok then you will have to try either a relay or fuse box connector . Good luck

Mar 12, 2010 | 1988 Ford Taurus

1 Answer

2001 Taurus Headlight Problem


have you replaced the headlight switch, have u cleaned the headlight grounds?

Aug 31, 2009 | 2001 Ford Taurus

1 Answer

1997 ford taurus gl back passenger window stoped working except ever once in a wile whats wrong ?


The switch might be burnt or dirty, or the wires could have fused together from over-use and/or resistance when opening. This puts higher pressure on the window motor and causes wires and switches to get extremely hot and melt wires or burn the switch contacts, try cleaning the switch first, then if it's still not working open the door panel and trace the wire from the switch to the motor and from motor to control panel. Repair where neccesary.

Mar 09, 2009 | 1997 Ford Taurus

1 Answer

Auto headlights staying on after turning off the car?


would be the relay sticking allowing the power to run lights even though there is no power triggering the relay would pay to get new relay and see what happens as is commin problem

Feb 02, 2009 | 1997 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...