Question about 1998 Nissan Pathfinder

1 Answer

Power windows will not work none of the windows roll up or down. Fuses have already been checked

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 467 Answers

Check the power window switch make sure its working. to check turn oon the dome light in the car, depress the switch if the light dims then the switch is good, next step, check the fuse and relays that control the power window make sure its good. take off the door panel and make sure the window is still in its track, check the poter for operation by adding 12v

Posted on Jul 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Ford Taurus front passenger window went down and won't roll up


Remove the switch panel and check to see there is 12V power there.. If there is Push the switch and see if the power comes out of it to drive the motor, if the power is not present check the wire back looking for the short.. usually if the power is missing none of the windows will work. look where the wires come out the door post to the door. look at fuses, If there is power and it does not come through the switch when you push the switch. the switch might be bad. in which case jump the switch to roll window up and buy a new switch (rock auto.com) if you apply 12v power and the window still will not go up.. you will need to replace the motor. not a hard job. you must remove door panel and remove regulator and motor and replace and reinstall. either junk yard part, craigslist part or new at Rock auto.. Post a comment and let us know what happens.

Aug 19, 2014 | 1995 Ford Taurus

1 Answer

Windows will not roll down on 1997 nissan maxima


hi Ray
I can advice you to start by checking the fuses first, I am sure you will find at least 1 faulty fuse.
good luck

Feb 01, 2014 | Nissan Cars & Trucks

1 Answer

Power windows wont work


Do you have power and ground at the driver's master switch ?

Jan 17, 2014 | 1997 Jeep Grand Cherokee

1 Answer

My Fiancee rolled down all of her power windows in her 2006 toyota rav 4 to clean it and when she went to roll them back up, none of them would work except the drivers side


She must have hit the child proof lock switch, it is on the drivers side there, It should be the problem, If not, could she have splashed water down there? It might dry out and be fine. If not, I would check fuses, then pull the master switch and see what happened to it. It seems weird that it happened all at once. Gotta be something simple. Hope this helps.

Oct 05, 2010 | Toyota RAV4 Cars & Trucks

1 Answer

None of the windows will roll down. I replaced the


check to see if your getting power to the switch if so try to jump power to the wire going to the motor bypassing the switch if the motor works replace the master switch in the drivers door

Oct 22, 2009 | 2004 Oldsmobile Alero

1 Answer

I have a 2007 Pontiac G6 and none of my windows roll up or down


1. have window switch checked 2.unplug all window motors,3.plug one window motor up at a time to determine which window motor causes the fuses to blow. 4.the could be an electrical short inside motor,check all wires to motors to be shure that none of the wire insulation has been cut. 5.check wiring diragram and have body control computer checked.

May 12, 2009 | 1996 Ford Explorer

1 Answer

Power windows stopped working


the switch could be bad replace the switch

Mar 06, 2009 | 1998 Buick Century

Not finding what you are looking for?
1998 Nissan Pathfinder Logo

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...