Question about 2004 Isuzu Rodeo

1 Answer

No brake lights or dash lights

I bought this 2004 isuzu rodeo that i knew had been high durplaned and hit a guard rail the guy I bought it from fixed it him self he does some body work on some old cars he has and sells them he showed me the pictures of the wreck now that i have bought it and finally have driven it at night for the first time since purchase i have no dash lights or brake light but do have emergency and back up light and turn signals
everytime i put a fuse in it it immediatly blows instancely I have been told it's a short some where in the wireing harness can you give me suggustion on how to go about finding this will i have to take the whole front it back apart? ps i have checked the bulbs they are fine

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

You obviously have a hard fault in the circuit. Somewhere in the system the power is grounding out before it is supposed to. I would download a diagram from autozone.com in the DIY section. There you can trace where the power is supposed to go and look for chaffed or bare wiring.

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Rodeo 2004 is showing ABS and Brake light on Dash. Mechanic check shows error CO221 RHF ABS channel in release 2 long. Whats the problem?


Check the wiring to the sensor on the wheel on the front passenger side. Look for any areas that are worn etc. If there are any, repair them. IF you don't find any check the connections and then replace the sensor.

Feb 02, 2017 | 2004 Isuzu Rodeo

1 Answer

Why is 97 rodeo battery and brake light turned on and a/c blower want turn on


is engine running?
if yes>?
got ABS?
1: charge system failure.
2: brake failed or fluid low, or other brake failure. (up to 4 on light)
3: the blower in the dash is dead? in all modes, heat and A/C?
do tell.?
does the blower work in High.
did all this happen in 1 day, or a year, or just bought this sick car/?

check fuses yet?
blower fuse.

Jul 01, 2014 | 1997 Isuzu Rodeo

2 Answers

What transfer case control module will fit a 2004 isuzu rodeo?


Try going to www.car-part.com They have a built in Hollander interchange, if there is anything out there that will interchange it will let you know.

Apr 06, 2014 | 2004 Isuzu Rodeo

2 Answers

My 1997 rodeo brake lights won't work


Have you replace or tested the brake light switch at the brake pedal arm under the dash? If not do so, it is likley the problem.

Jan 25, 2012 | 1997 Isuzu Rodeo

1 Answer

I have a 2006 isuzu rodeo and i cant get it out of four wheel drive low i have try to put it in 2 wheel drive high and four wheel drive high but it still coomes up on dash that its four wheel drive low...


I have 2002 and I find that you have to come to a complete stop, put it in reverse momentarily, and that should take care of it. Cheaper than going to the dealer and having them really fix it!!!

Oct 02, 2011 | 2004 Isuzu Rodeo

1 Answer

How to install a rear brake light bulb on a 2004 Isuzu Rodeo


The easiest way is to open back trunk open any coverings or carpet pull it back to gain access to the bulb socket once you see the socket twist it counter clock wise and remove remove the bulb and replace with new one once installed have someone step on your brake pedal to confirm working then put upholstery back and you =have completed changing your brake light bulb.

Dec 27, 2010 | 2004 Isuzu Rodeo

2 Answers

I have 2000 isuzu rodeo lse replace brake pads and


CHECK SENSOR ON THE PADS, OR BRAKE SIDE

Jul 24, 2010 | 2000 Isuzu Rodeo

3 Answers

Alternator keeps going bad - three so far. Battery light flickering off/on now.


You have probably been getting 'rebuilt' units which is not bad in itself but if the rebuilder received a batch of bad diodes they may have these failures until they are exhausted.
But, buddy, you ain't broke my record yet; a lousy Saturn (LAST GM I will own!) bought new, ate SIX (6) alternators in 57,600 miles. That wasn't the worst problem; it ate the auto tranny at 31,000 and dropped a rod cap at the above final mileage.    

May 04, 2009 | 1998 Isuzu Rodeo

Not finding what you are looking for?
2004 Isuzu Rodeo Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...