Question about 1999 Chevrolet Silverado 1500

2 Answers

99 chevy s-10 4x4 (push button) stuck in 4hi

Couldn't get up the driveway so i put it in 4hi. I got up the driveway tried to disengage it back into 2hi nothing. It clicks and makes noise but doesn't go back into 2hi. What is causing it to do this. This is twice in a month this has happened the first time i drive for 3 days in 4hi till i got it to pop out of 4hi back to 2hi

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Do you have to truck in neutrul when trying to swtich back. some models you need to put it into 4 low then into 2 hi.

Posted on Aug 23, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The solder broke in the switch unit. Pop the switch unit out with a butter knife and re-solder the pin connector on the main board. Super easy job.

Posted on Jun 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy suburban stuck in 4 lo anyone out that cant help


Put truck in Neutral while key in run position engine off or on (doesn't matter which). If it's pushbutton 4wd then try hitting 4low again. if that doesn't work some of the chevy trucks required you to press 4hi to get into 4high and then press 4hi again to get back to 2hi, unless yours has a 2hi button. In that case press 4hi to get into 4high and then press 2hi to get back to 2wd. either way you need to be in neutral to get out of 4lo. I have shift on the fly (Mechanical Shifter on floorboard for transfer case) on my 1990 Suburban and still have to put it in neutral to get out of 4lo. Good Luck.

Jan 30, 2014 | 2000 Chevrolet Blazer

1 Answer

02 chevy silverado 4x4 service light always on and stuck in 2 wheel drive.


You need to have the dealer scan the control module to see what codes show in memory

Jun 17, 2012 | 2002 Chevrolet Silverado 1500

1 Answer

How to put into 4x4 hi ?


If its a 4WD there is either a push button on the dash left side of steering colomn, its marked 4hi. If manual shifter in on floor center console. Pull back on lever to second notch marker 4hi. If you are in 4lo now and can't get out. first put tranny shifter in neutral while engine running, then shift transfer case into neutral (manual push forward), push button hold 4hi and 4lo at the same time til "N" green light comes on. Then shift either into 4hi.

Jan 27, 2011 | 2001 GMC Yukon

1 Answer

My truck is stuck on 4HI it will not shift into 2HI what can I do


Had a similiar problem in a 2005 1500 had to put the truck in reverse - forward -reverse - forward sereral times before it would disengage from 4Hi. May not help in your case but worth a try. Let me know if it works or not.

Dec 01, 2010 | 2001 GMC Sierra 2500HD

1 Answer

96 chevy 4x4. no ind lights. stuck in 4hi


Replace the selector switch assembly. Common failures.

Mar 27, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

96 Chevy Blazer Stuck in 4hi


try reverse and push the button

Jan 06, 2009 | 1997 Chevrolet Blazer

1 Answer

My 1997 Blazer won't go into 4hi


Try disconnecting your battery for 30 min. After reconnecting battery turn ignition back and forth 7 times. This is a Chevy problem known as logic lock. this is engaged to let you know that there may be a bigger problem at hand and the computer wants you to get it looked at.

Dec 20, 2008 | 1997 Chevrolet Blazer

2 Answers

4wd stuck in 4Lo


it is either the control switch or the actuator. look if light is flashing on push button switch. if so it is stuck. you can check actuator on front axle, to watch and see if it is moving.

Dec 06, 2008 | 2001 Chevrolet Tahoe

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...