Question about 1999 Chevrolet Silverado 1500

2 Answers

Check engine light wont go out changed plugs wires still wont go out

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

You need to know what the code is and correct that problem first. Then you need a scan tool or a code reader that can clear the code manually. Will not clear when you just change a part

Posted on Jul 31, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,776 Answers

Take the vehicle to an autoparts store and have them use a scan tool to retrieve any fault codes that are stored in the computer. Most parts stores will perform the scan for free. The fault codes show what faults the computer has identified and what system. Getting the codes will eliminate the guesswork. Hope this helped and best wishes.

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 98 silverado wont start, engine cranks wont turn over, changed plugs,wires cap,rotor,crank shaft sensor was damaged changed that, also changed ignition coil, and camshaft sensor, fuel pump seems to be...


This is something that you cannot afford to throw any more money at. Get a timing light to check to see if there is spark. Use a pressure guage to check fuel pump. Get bug lights to test injectors.

Dec 16, 2014 | Cars & Trucks

Tip

Things to check when your 91 accord wont start


if you 90 91 92 93 or 94 accord will not start some common problems can be
1.the engine relay may be bad it is located next to the wiper fluid
2.Check the spark plugs make sure they are clean and not in need of change
3.in the trunk behind the panel next to the rear shock on the passenger side there is a wire make sure that wire is tightly plugged in and secure if not your pump wont deliver fuel to the engine
4.if the S light turns on and off that means the CPU for the tranny might need to be repaired

on Dec 01, 2009 | Honda Accord Cars & Trucks

2 Answers

Changed transmission fluid on crv now car wont start


might be that you accidentally disconnected the crank sensor close to the transmission, this gives a no start condition without a check engine light on most cars...

Apr 19, 2014 | 2005 Honda CR-V

1 Answer

Suzuki wagon r+gl check engine light keeps flashing and wont start after battery change


the engine (there are more than one engine)
has a distributor.
"have spark at coil down to dizzy but no spark at plugs"
this can mean only 2 things.
1: spark wires are dead. all 4, kinda hard to believe huh?
2: the dizzy is way off time. so time the dizzy and now spark
lands on each wire term.
if not a dizzy engine, post exact version of engine and country.

Apr 14, 2013 | Suzuki SX4 Cars & Trucks

1 Answer

Chrysler town country engine light flashes 10 times


does it have coil packs? you may need to replace one

Jan 26, 2013 | 2004 Chrysler Town & Country

2 Answers

96 regal 3.8 liter missing at above 3000 rpm, stumbles and wont go over 4000 rpm. changed plugs and wires, coils,and checked all injecters,seem to be all functioning.changed fuel filter too.no check engine...


I have a 2002 Lesabre with the 3.8 engine. Mine started running really bad. The code was random engine misfiring. I changed plugs, wires and a few other parts with no success. It ended up being the ignition control module. It sits under the coils on my car. Cost around $150. Mine went bad at around 110,000 miles.

Apr 16, 2011 | Buick Regal Cars & Trucks

1 Answer

My 2005 dodge neon turns over but wont stay running if you take your foot off the gas.


does the car have gas check fuel pressure change plugs wires change fuel filter change air filter change throttle postion sensor is you check engine light on

Dec 01, 2010 | 1997 Dodge Neon

1 Answer

2001 Dodge Caravan Check Engine Light wont go away


i would try a coil pack maybe you got a bad one . did you clear the code after you changed the parts . disconnect the batt for ten sec

Oct 20, 2009 | 2001 Dodge Caravan

1 Answer

Car wont pass smog.


Is it running rough? Is the check engine light on?

May 27, 2009 | 1991 Toyota Camry

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...