Question about 1990 Dodge Dynasty

1 Answer

I have a 1990 dodge dynasty with an a/c drain line blockage.

I have a 1990 dodge dynasty with an a/c drain blockage... Where is the drain line hose located?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Should be on the right lower side of the firewall. Most cars have a black ribber elbow on them. Take a wire coat hanger and just insert a couple of inches in the tube, not to far to wher you poke the evap.

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why want my front left brake release on 1990 dodge dynasty


Maybe the caliper hose has a problem? Is the hose new?

Dec 14, 2014 | Dodge Cars & Trucks

1 Answer

How do i time my 90 dodge dynasty. Do I just line


3.0 L v6, align crank sprocket with mark on block dot to dot about 1 o'clock and the cams with marks on housinga6c369c.jpg

Nov 08, 2009 | 1990 Dodge Dynasty

2 Answers

Dodge Dynasty 1990, 3.33 liter eng. The belt


Check to see if all your pulley's are aligned properly. It sounds like they may not be. Put the belt back on and look straight down it. If it appears to have a bend, that needs to be fixed. If you have a carpenter's square you can use it to double check you eye. You can use washers as shims on the bolts that hold whatever is out of line. If it sticks out too far you'll have to grind or file it to bring it back in line or remove washers or spacers if there are any. Hope this helps.

Oct 04, 2009 | 1990 Dodge Dynasty

1 Answer

Car overheats - also dies while driving


Not good. I saw nothing about the fan being checked?

Sep 17, 2009 | 1989 Dodge Dynasty

1 Answer

Heater hose diagram for 1990 dodge dynasty. The heater hoses where conected togather due to a bad heater coil that has now been replaced I need to know how to put heater hoses back where they go and I am...


remove the hoses at the temp conection inspect them to make sure they are good them follow the one that comes from the pump housing goes to the top of the heather core outlet and the return one to the bottom this may be a bit diferent if the engine is 6cyl or 4cyl.

Sep 08, 2009 | 1990 Dodge Dynasty

1 Answer

I have a AC condensation blockage in my 1990 Dodge Dynasty


The water problem is caused by a blocked drain hose. If you get under the car you should see a line or hose coming through the firewall or front floorboard. It is plugged up with insects or road debris. Use a coat hanger or pen and dig in it for about a foot til it clears.
The second problem was caused by the first, water is not good in the ductwork. Most likely a door "motor" is shorted or disconnected. When you get the water out you may have a 10% chance of the other problem clearing up. Good Luck Sometimes a trip to the Salvage yard is an excellent education for location of parts. Also cars work with used parts.

Jul 28, 2009 | 1990 Dodge Dynasty

1 Answer

When car is started i have no brakes


sounds like theres a vacumn hose off your master cylinder

Jul 04, 2009 | 1990 Dodge Dynasty

2 Answers

I HAVE A 1990 DODGE DYNASTY.HOW DO I FIX THE HEATER BLOWER THAT STOPPED WORKING?


it could be a 7 dollar resistor thats bad. Thats located behind the fluid washer resovoir.

Oct 08, 2008 | 1993 Dodge Dynasty

Not finding what you are looking for?
1990 Dodge Dynasty Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...