Hi - I have a 2006 Jeep Commander and the wiper-wash pump is not working. I can't tell from the fuse diagram in the manual which number it is. Anyone have an idea?
Easiest way to check is to locate the washer pump on the bottom of the tank, disconnect it, and hook a test light between the two terminals! One will be power and the other ground, so when you hit the washer button, if it lights up, you need a new pump! if it doesn't it is most likely in the switch, cause there are going to be other functions you are missing in your vehicle as the fuse is going to control more than just the w/washers!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you have an owners manual look inside of it that should tell you were the headlight fuse or fuses are located.. if you don't have the owners manual look on the inside cover of the fuse box there will be a diagram showing which fuse it is.. please be sure to give your feedback thank you I hope this helps
do you hear the mini washing water pump noise (working)? if no: check fuse panel where labled washer... if yes: there could be a blockage in the very fine sprays ontop of hood, due to prevoius not clean water used before or any pricipitant..... you need to use a very thin wire or tool to clean it
Have you checked your owners manual... also look on the core support as you open the hood for a diagram. They are usually mounted there and possibly on the strut tower or under the hood. Also try your local library or parts store for a manual. I hope this helps you
×