Question about 2002 Dodge Caravan

1 Answer

Conflicting procedure for removing 2002 Grand Caravan door trim

The Chilton's manual for the 2002 Dodge Grand Caravan indicates that the drivers and passenger side interior door trim panels are fastened by hook fasteners which are disengaged by lifting the panel upward. Other sources indicate that the panel is fastened by plastic push-in fasteners which are disengaged by prying the panel. Can someone verify which is correct for this model?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Dodge Master
  • 1,619 Answers

Chiltons is a very basic manual cover numerous years. To check slighty pry the bottom edge of your door with your fingernails if it is tight all the way to the bottom it probably is the snap fastners. Make sure to remove the door handle bolts/nuts.

Posted on Jul 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace a window motor on a 2001 dodge grand caravan drivers side


Buy or otherwise obtain a Chilton Manual for your car.. You must remove the door panel and then the window regulator.. Try and not break anything.. Look at Rockauto.com for your part.

Sep 07, 2014 | Dodge Grand Caravan Cars & Trucks

1 Answer

How do i take off the inside drivers door panel on a 2005 dodge caravan


Hi Roberta, here's the instructions on how to remove your door panel. I have to wonder though on why you are removing it, my guess is you window doesn't roll up or down and your replacing the regulator. Any way here goes.

REMOVAL

  1. Remove the plug and remove screw attaching door pull cup to inner door panel.
  2. Remove switch bezel and disconnect power window/memory switch.
  3. Remove screws attaching trim panel to door from below map pocket.
  4. If equipped, remove window crank. (Refer to 23 - BODY/DOOR - FRONT/WINDOW CRANK - REMOVAL)
  5. Remove screw holding door trim to door panel from behind inside latch release handle .
  6. Disengage clips attaching door trim to door frame around perimeter of panel.
  7. Lift trim panel upward to disengage flange from inner belt molding at top of door.
  8. Tilt top of trim panel away from door to gain access to latch linkage.
  9. Disengage clip attaching linkage rod to inside latch release handle (INSIDE DOOR HANDLE LINKAGE).
  10. Separate linkage rod from latch handle.
  11. Disconnect the power door switch, courtesy lamp electrical connectors.
  12. Remove front door trim panel from vehicle.
Hope this helps and have an awesome day Roberta!

May 21, 2014 | 2005 Dodge Grand Caravan

1 Answer

How to replace timing cover gasket on 2000 DODGE grand caravan 3.3 liter 2wd


Get a haynes, or chilton manual or try youtube. Too long to write out here.
This isn't a solution but a suggestion.

Dec 04, 2011 | 2000 Dodge Grand Caravan

1 Answer

How do I replace door lock actuator on my 2002 dodge grand caravan?


Which door? I can advise on drivers side sliding door.

Jul 17, 2010 | 2006 Dodge Grand Caravan

1 Answer

How do you replace sliding door motor on 2002 dodge grand caravan ex


There are alot of little things that are hard to explain. Would say buy a Chilton with all the pics of just what to do $20 good advice








































































































Remove trim panel from door using a trim tool, use this or maybe break a clip. Remove retaining clip using needle nose pliers from flex drive assembly to door motor. Remove flex drive cable pulling straight out. Disconnect the elec. connector from motor depressing the tab. Carefully pry out the 4 push pin fasteners...Hope this helps





Jan 17, 2010 | 2002 Dodge Grand Caravan

1 Answer

Rear wiper motor not working


Remove the wiper arm. Lift the hatch up. Remove all related trim around the hatch. Unbolt the wiper motor, and install in reverse order.

May 28, 2009 | 2002 Dodge Grand Caravan

2 Answers

Removal of left front panel, inside, of 2002 dodge caravan


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

Feb 18, 2009 | 2002 Dodge Caravan

3 Answers

2007 slider door lock dosent work


Mostly SNAPS you May find a Screw or few Hidden under Cloth Uphostery or By the Handle.-----------Please if this Helps You HELP Me and RATE ME

Jan 21, 2009 | 2007 Dodge Grand Caravan SXT Minivan

1 Answer

Remove inside panel pass.side door of 2001 Dodge gr.caravan sport


1, Disconnect the able from negative terminal of the battery.
2. Pry the courtesy light from the door trim and disconnect the wire connector..
3. Remove all door trim panel retaining screws and door pull armrest assemblies.
4. Remove the door switch panel and the control switch panel and the control switch assembly.
5. On models with memory seats/mirrors, use small-flat bladed pry tool to remove and disconnect the wire.
6. Grasp the trim panel lift up and pull out to detach it from the door. Disconnect the inner door handle lock rod from the handle. Unplug any electrical connectors remaining and remove the door panel.
7. To install, connect the wire harness connectors and place the panel in position in the door. Press the trim panel down into place until the hooks are seated.
8. Install the armrest/door pulls, the courtesy light and the window switch'
9. Reconnect the battery


Also. You will need star pattern drivers to remove the window and motor from your door. If you have all the equipment it should only take you 1 hour.

Jan 15, 2009 | 2000 Dodge Caravan

Not finding what you are looking for?
2002 Dodge Caravan Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...