Question about 2005 GMC Envoy Xl

Open Question

Driver side switch not working. It's not the switch. I already replaced it

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver window switches do not operate windows


Which assembly did you change?. It's could be the passenger switch as feed from drivers side not getting being registered. Look for remote connector on assembly and put live feed on it to test. Should isolate problem.

Mar 31, 2014 | 2008 Toyota Yaris

1 Answer

Power windows master swich is operatein 3 windows.no operate en driver side windows


Replace the master switch,it is the problem.If you have already,then there is a wiring problem,unless the motor is bad in the door,if it is working at that door switch,then there is a wire problem,if the master has been changed out.

Apr 24, 2010 | 1998 Mitsubishi Diamante

1 Answer

My driver side power window stoped working.I took the motor out and hooked it up to the pass side and it worked fine. I put it back in the driver side and it dose nothing.The relay makes a clicking sound...


Most of the time if a power window is not working, the fault can be on switch, try checking out the switch and make sure it works as you already checked the motor and relay and probably fuse too.

Mar 07, 2010 | 1999 Ford Explorer

2 Answers

Windo motors wont work


The driver side window switch is the master switch, the power or input to either roll the window up or down goes thru that switch. Double check all the connections on the back of the driver side window switch are good. With a DVOM you can also check to see if 12v are even getting to the master switch in the first place. If you aren't even getting power to the main power window switch you could've blown the power window fuse.

Jul 17, 2009 | 1994 Oldsmobile Silhouette

1 Answer

The driver side window will not go up. The switch


yea remove it and try banging on the motor a bit it may go up at least. it need replacing if you checked fuses already

Mar 20, 2009 | 1986 Ford Bronco

2 Answers

Passenger window only works from drivers switch


If you have already replaced the passenger side switch and it still doesnt work its a good chance that there is a pinched wire in the door itself. However usually it wont work from the drivers side either. But I still suggest looking there first.

Dec 12, 2008 | 2004 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...