Hi. Thanks for your question. For assistance on clearance and firing issues you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!
SOURCE: I want to know the valve clearance adjustment.
intake .22 to .28 mm
exhaust .27 to .33 mm
rate me solved...this is all I can find
SOURCE: Valve clearances Toyota carolla
Hi,
the valves clearnces are: Inlet- 0.20 cold & Exaust- 0.25 cold.
Cheers
SOURCE: FORD cortina 3.0L V6 starting problems.recon tops
Have a look at the coil and its supply lead, standard it has a 9v coil and a resistor wire in the harness, this gives trouble ar resistor wire is odd and will not solder or weld and its expansion when hot loosens crimps! If you put 12 volts into a 9v coil it overwhelms (magneticly) the windings and gives a poor spark, also burns the points.
SOURCE: firing order 1960 pontaic star
Local libraries carry old service manuals that will give you the firing order.
Tune Up
Spark Plug
AWSF-42C
Spark Plug Gap
0.044
Ignition Timing
10 degrees BTDC
Firing Order
1-4-2-5-3-6
Distributor Rotation
Clockwise
Valve Clearance Intake
0.014
Valve Clearance Exhaust
0.016
448 views
Usually answered in minutes!
×