Question about 2003 Chevrolet TrailBlazer

1 Answer

ELECTRIC WINDOWS THE DRIVER DOOR PANEL THAT HAS THE CONTROLS FOR ALL THE WINDOWS IS NOT WORKING . THE WINDOW CONTROLS ON EACH DOOR STILL WORK . THE DRIVER DOOR PANEL STILL WORKS FOR THE ELECTRIC LOCKS . PLEASE HELP !!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 521 Answers

New cntroller/switch set for the driver door. The switches may have broken inside their housing. easy replacemnt as it usually just pops out the hole its in. Just pry gently with a rocking motion.

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't operate electric window on driver's side door


The door panel will have to come off. check for a bad motor or wiring to motor, or a bad drivers side switch. check the fuses first! and is the drivers side window locked on drivers side, just push the unlock window from the master controls on drivers side to see if it works. on my car, the drivers side window would not work. I accidentally hit the window lock with my arm. God-Bless!

Jan 29, 2015 | Cars & Trucks

1 Answer

Buick 2002 LaSabre Custom all windows do not go up and down, door lock/unlock switch drivers side does not work(passenger & rear doors lock/unlock door switches work, trunk release button does n


coulb be the control switch on your panel you can take the door panel off and check for loose connections and try to test for continuity. if you dont know how take it to a shop and have them diagnose the electrical. im quite sure it the switch that burnt out

Oct 24, 2012 | 2002 Buick LeSabre

1 Answer

My 2006 F-150 drivers side control panel is dead & none of the electric windows, locks, mirrors or door sensor will work. I checked all the fuses & they are fine. The passenger door sensor &...


With the list you have, I would think broken ground wire in the rubber boot from the A-pillar to the door on the driver's side.
I have seen this one a few times ( not chronic but happens ).

It is a black wire in the door to a-pillar harness. SWAG at why the window worked when open part way, the wire touched at that one time, and pulled back apart again.

Example picture of a broken wire
sscullys_216.jpg

Sep 19, 2011 | 2006 Ford F-150

1 Answer

How to remove drivers door panel on 1999 ford escort. I need to repair the windows switch for the drivers side. My window is in the down position and won't come up when I push the button. All other windows...


Remove the front door pull cup screw 1152a96.gif

Remove the screw cap and the screw from the inside door handle and slide the handle rearward to disengage the hook from the inner sheet metal.
  • Disconnect the inside door handle from the front door latch remote control link
37470b2.gif

Remove the two-piece pushpins from the front door trim panel (23942).
2a1605a.gif

NOTE: Use a commonly available spring loaded trim pad removing tool with a long thin nose to prevent damage to the door trim panel.
Release the seven front door trim panel bullet nose fasteners and push inboard, then upward to release the front door trim panel.
  • If equipped, disconnect the master window regulator control switch electrical connector
cc0d2af.gif

Remove the retainer from the master window regulator control switch panel.
  1. Pull outward on the cup retainer tabs and remove.
  1. Remove the master window regulator control switch electrical connector from the retainer
ab8ff6c.gif

Jun 05, 2010 | 1999 Ford Escort

1 Answer

Rear electric window will notwork


Yes . Remove door panel, switch connectors and plastic protective covering on the door. have a helper pull the windw up while you measure the distance from bottom of window regulator to bottom of door panel.
(approx 8-12"), cut a block of wood that will fit between the bottom of the regulator to bottom of door panel wedge it threw the opening in the door a place it between the regulator and door bottom. Wood is soft and sturdy and should hold up until you get the window fixed.
Can the driver control panel switch make that window work. If the answer is No then the problem is the motor on that side. If the answer is yes then the problem is the switch on that window. by the way if the driver control panel gets the window to rise Merry Christmas you don't need the wooden block.

May 05, 2010 | 1997 Plymouth Grand Voyager

3 Answers

Toyota prado 1996 electric window and mirror on drivers side is not working. Whole drivers door window control panel and also mirror on that side) Is this a fuse? If so where is fuse?


the fuses for the windows will be in fuse box, it sounds like possible water intrusion,the fuses should all be marked, if they are all good,you may have to remove the door panel to check for any damage at door switches

Dec 14, 2009 | 1996 Toyota Land Cruiser

2 Answers

Window not working,not motor,there is a black box ithink it is to make window go up or down by 1 touch?nissan serena import.


If other windows are ok, then it appears like your problem is the master control switch-on driver's door.
Try spraying some electrical-contact cleaner on all the window switches. If that don't work, you may have to replace the master-control switch on driver's door panel

Nov 03, 2009 | 2000 Nissan Maxima

1 Answer

Driver window button is the only one to work


lightly pry the switch up from the driver's door and do the same with the other doors. Check the voltage from the door switch on one of the other doors (it probably won't show any voltage). What it sounds like is the master door switch (driver's side) has shorted out, actually it's in the lockout mode. First try some electric contact cleaner spray, and spray the driver's door switch, make certain that the driver's side isn't in the locked mode for other window operation and if that still doesn't work, you'll need to replace the master door switch.

Good luck.

Mar 25, 2009 | 1998 Jeep Cherokee

1 Answer

Drivers side electric window does not work


Remove the door panel and disconnect the motor from the window, but leave it plugged in. See if the motor works. If it does you should grease the tracks on the window. If the motor does not work then you should replace the motor. The motor will probably get hot when you try working it.

Jan 23, 2009 | 2005 Nissan Xterra

1 Answer

All of a sudden the driver side window will not roll up.


is it electric windows? if it has electric windows does the passenger window roll up using the switch for it on the passenger door panel? if it works on the passenger door panel and not on the driver's door panel , then your switch on the drivers door panel is bad... replace it.

Oct 13, 2008 | 1999 Oldsmobile Cutlass

Not finding what you are looking for?
2003 Chevrolet TrailBlazer Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...