Question about 1992 Saturn SL1

Open Question

How do you replace the 99' saturn sl1 wiper linkage?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 saturn sl1 sedan Wipers started acting up a


sounds to me like the wiper motor may need to be replaced, but before doing that see if there is a wiper relaay in the fuse box, it is a lot cheeper than a motor and it may be as simple as popping it out and putting a new one in. Also check the wiper linkage, it too could just be stripped. Hope this helps. Stay out of the rain. Hope this helps.

Sep 13, 2013 | 1997 Saturn SL

1 Answer

Where is the water temperature sensor on a 99 saturn SL1 & how do I change it?


IT IS LOCATED ON THE LEFT END OF THE CYLINDER HEAD (DRIVERS SIDE )

Dec 24, 2011 | 1999 Saturn SL

1 Answer

How do i replace the ignition switch on a 99 saturn sl1?


I would refer you to a Chilton or Haynes or Dealer service manual. I looked on my online resource but it was incomplete as far as replacing the ignition switch on the saturn sl1.

Sorry about that.

Oct 08, 2010 | 1999 Saturn SL

1 Answer

What type of engine do I have in my 1998 Saturn SL1?


if it is an SL1 it has a SOHC 1.9L. Basically the same engine was in all saturns 91-99, just different heads. the Sl2 had double over head cam and the Sl1 had SOHC.

Sep 29, 2010 | 1998 Saturn SL

1 Answer

Wiper problems on a saturn SL1


If the driver's side is working OK then most likely your problem lies with the attachment of the passenger side arm to the transmission. The transmission is the linkage between the wiper motor and the wiper arms. Often the female or socket part of the arm has become stripped due to turning the wipers on whilst they are ice/snow stuck to the windshield. Remove the cap at the base of the arm, often this is already gone. Get a socket wrench and remove the nut which is exposed. Now gently pry the entire arm up and away from the splined stub sticking out, maybe some liquid wrench or WD40 could help here. Do NOT pry against the windshield. Take your removed wiper arm to a salvage or junk yard and have them sell you another just like it but making sure the inside of the stub socket is not already stripped smooth too. Put it on in the reverse order, firmly tightening the nut.

Apr 28, 2010 | 1998 Saturn SL

1 Answer

Wipers not working on 98 saturn sl1


sounds like a short in the wiper switch inside cab.
test volts at the wiper motor with switch on with test light if none, check wiring to motor for shorts or breaks.
replace switch inside cab if all else checks ok.

if light lights up at motor IE has 12 volts at motor,on all wiper settings, it may be bad motor.

Sep 05, 2009 | 1993 Saturn SL1

1 Answer

Wipers seized - need to get linkage out


Try using wd 40 or something to losen up the rust or if you have and know how to using a cetaline torch and heat it up tren try tapping it with a hammer it should break free,

May 07, 2009 | 1992 Saturn SL1

3 Answers

Windshield wiper linkage 2005 saturn ion


Their is a solution to the common saturn ion windsheild wiper problems. A new improved version of the wiper linkage is available and it has aluminum pivots instead of plastic. The plastic pivots were the weekest point of that linkage. I bought one oat this link and put it in myself. Awesome product

Apr 19, 2009 | 2005 Saturn ION

1 Answer

98 Saturn SL1 Intermittent Wipers stay on full


no this is not an expensive problem. you just need the wiper relay switch.

Dec 14, 2008 | 1999 Saturn SL

Not finding what you are looking for?
1992 Saturn SL1 Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...