How do I change a 2008 Mazda 5 solenoid D ? - Mazda Cars & Trucks

12vdc power to the injectors is dead,well that is fuse blown .
no engine told (real name)
no year told 1999 to 2010


no VIN told
why make this so hard the service manual is indexed by
country year,maker,model and by engine
so far mazda 5 is all we know.
so we can not read the manual to you can we.? no.
the schematics there , impossible to find lacking key facts.

2010 had
2.0 L MZR-CD I4 DieseL, 89 or 105 :kW (105–143 PS/103-141 hp)


now the real name MZR_CD, not this fact maters
on wiring any EFI or diesel

no MZR-cd diesel here in USA so no books or parts.
zero here, see why telling country of VIN matters so much.?
2002 to 2008 says wiki that engine. (just it)
2.2l
SPECS
Denso HP3-based common rail with system injection pressure increased to 2,000 bar (29,000 psi)
common rail injectors that have 10 spray small 0.119 mm (0.0047 in) holes (instead of the 6 used on the MZR-CD 2.0) and higher response solenoids
Mazda 5/Premacy (both versions) since January 2006

SO SORTED THAT OUT 2006 TO 2008 MAZDA 5? ??????
THE HARD WAY;.

Put a pressure guage on the fuel rail. Does it have spark at the plugs?

Headlight Change 2006-2010 Mazda 5 - CarCareKiosk

www.carcarekiosk.com/video/2009_Mazda_5_Sport_2.../headlight

This free video shows how to change a burnt out headlight on a 2009 Mazda 5 Sport 2.3L 4 Cyl.. Complete instructions for replacing a head light bulb on a 2009 ...

Low beam head light bulb replace 2000-2006 Mazda Mpv ...

? 5:11
https://www.youtube.com/watch?v=kblzMLRJrok
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...

The starter solenoid should click, if it's working. If not then the solenoid or loose connection to the solenoid could cause the problem.
Also check the ground connection from the battery to the engine for a tight connection.
Hope this helps.

http://www.youtube.com/watch?v=5Jeb0KpAN_g

Complete video showing the part and it's location, inside of the transmission.

follow this link to mazda owners club gives good directions to your problem
How do reset the keyless system MX 5 Miata Forum

check 3-4 solenoid or pressure switch

they are under the plastic cover on the top of the engine ,take it off and you should see them

Those Codes are EVAP ( emission codes), not likley that the battery problem and those codes are related. The Evap solenoid is most likley the culprit

Yes you can add auxiliary or ipod interface also xm radio

go here for more information
http://www.oemautosound.com/c-161-mazda-products.aspx