Question about 1999 Dodge Caravan

1 Answer

Replace ac belt 99 caravan - 1999 Dodge Caravan

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 2,039 Answers

With 3,0liter engine if its that be carefull when does belt start to go normally ac compressor start to jam if you hear a big quealling noise turn off ac compressor off its jam you simply blow the belt again afer you gonna have to change the compressor good luck pierre

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does anyone know the size of the belt to bypass the ac on a 99 caravan 3.3.


If you go to the Dayco web site they should have the belt and belt diagrams listed for the engines with and without air con,

Dec 23, 2012 | Dodge Grand Caravan Cars & Trucks

1 Answer

Ac pulley


The pulley can be replaced you can't get another belt, they do not make one. Even cars without AC have the same belt, in the place of the AC compressor is a "AC Delete" pulley.

Jun 12, 2012 | 2000 Dodge Caravan

2 Answers

When idling in gear with the air conditioner on, there are what feels like misfires. I have had the spark plugs and wires replaced and the Injector O rings replaced. Do you have any suggestions.


too much gas in AC system ,have it re gassed on a proper machine that will empty system and weigh what comes out ,it should about 700 grms unless it has two units one in the rear then its about a kilo of gas

Oct 05, 2010 | 2005 Dodge Caravan

3 Answers

Need drive belt diagram for 3.3 dodge van


Below is the diagram you requested. It's for a 3.3L with AC. If you need the diagram without AC, post back with the request and I'll track it down 4 you. Best of luck!
Greg

99 Caravan 3.3L Serpentine Belt
51e838e.jpg

Nov 13, 2009 | 1999 Dodge Caravan

1 Answer

99 dodge caravan 3.0 water pump


it is located on pass side behind timing cover the timing belt runs the water pump so the timing belt will have to come off this is a big job!

Feb 01, 2009 | 1999 Dodge Caravan

2 Answers

Serpentine belt issues...


sometimes you can look at the back with flash light it is surounded by rubber if it is cracked or broken, But check your alternator and make sure you have pulled it out far enough it may just a imple fix.

Jan 24, 2009 | 2000 Dodge Caravan

1 Answer

How to replace serpentine belt?


how to remove and re-install serpentine belt?

Nov 20, 2008 | 2000 Dodge Caravan

1 Answer

Belts


depends on the engine...3.3 has 1 belt
3.0 has 2 belts a serpentine belt and an ac belt
2.5 has 3belts a waterpump belt an ac belt and a power steering belt

Nov 15, 2008 | 1995 Dodge Caravan

2 Answers

1999 dodge caravan


There is a tension pully located under the alternator. It has a bolt head in the middle of it. Place a long box end wrench on it and pull it towards you. The tensioner will move forward. first put the belt on the pullies properly. (see diagram placed at left side of the hood release). Then leave the belt off the pully that is located just under the motor mount. Pull back on the wrench that is placed on the tensioner as you at the same time place the belt onto the pully under the motor mount. Done. Remember that the tentioner may need to be replaced also. It might be a good idea to do that since that is the usual reason the belts jump off. Just a couple bolts with that and done. It is not expensive.

Sep 28, 2008 | 1999 Dodge Caravan

Not finding what you are looking for?
1999 Dodge Caravan Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...