Question about 2002 Mercury Sable

Open Question

I need the instructions to change 1 spark plug on a 2002 mercury sable cyl 1 which is in the back-

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My mercury sable 2002 motor Ustyle idals bad code p0316,301,303 come up changed spark plugs and wires still showing same codes what should i check now


PO301 & PO 303 are cylinder misfire in the cyclinders
indicated by the codes last number #1 & #3

Spark Plugs get replaced every 3 years or so & have
nothing to do with resolving any misfire issues, unless
they were in the motor for 80,000 miles & worn out

Spark Plug wire easily last 12 to 15 years or more &
usually only fail because they are mishanded & too often

You problem IF the codes are correct & they are not all the
time,is a bad ignition module or individual coil if that is
what you have

Jan 20, 2013 | 2002 Mercury Sable

1 Answer

My car is cutting off every time im going under 1000rpm. mercury sable 2002. codes were p0301 p0302 and p0316 until i changed crank sensor and spark plugs now it says p0316 p0305 p0306.. whats going on?...


Hi

P0305 is misfire in cylinder #5.
P0306 is misfire in cylinder#6.
P0316 is misfire on start up.
Have the plugs on those 2 cylinders, and the 2 fuel injectors checked, also check for spark from the coil on those 2 plug wires.

Please get back to us if you have further query or else please accept the solution.

Thanks for contacting fixya.com



Sep 05, 2011 | 2002 Mercury Sable

1 Answer

How do you rethread a sparkplug hole on a 2000 mercury sable dohc


You best bet is to buy a re tap tool that is designed to re thread spark plugs. It will go down past into the cyl then widen and you tap pulling it back out. You dont want metal shaving going down into your cyl the will damage the piston rings

Jul 02, 2010 | 2000 Mercury Sable

1 Answer

Digram of firing order for spark plugs, for 1991 mercury sable


For the 1991 Mercury Sable 3.8L V6:

Firing Order:
1-4-2-5-3-6
Cylinders:
.....(back)....
|...1...2...3...|
...................
|...4...5...6...|
......(front)
Distributor:
....(back)
......6..(+)-screw
1..........3
4..........5
(+)...2
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 18, 2010 | 1991 Mercury Sable

1 Answer

Misfire on Cyl #2


How is your oil filter? It might be plugged...

Jun 01, 2009 | 2002 Mercury Sable

2 Answers

2000 Mercury Sable 24V 3.o engine. Need to know


yes about the upper intake and the only way i know how to check the coils is with a engine anilyser or if the check engine light comes on then you can have the codes pulled and that will tell you which cylender is missfiring this engine has a indevidual coil for each spark plug so thares 6 of them and thay slide right down over the sparkplugs

May 05, 2009 | 2000 Mercury Sable

1 Answer

I need to change sparkplugs on a 2002 mercury sable. How do I get to the rear sparkplugs to change them?


REACH WAY BACK, MOST LIKELY YOU WILL BREAK THE WIRES WHEN REMOVING THEM FROM THE SPARK PLUGS

Mar 22, 2009 | 2001 Mercury Sable

1 Answer

What is the 2002 Merc Marquis cylinder order


The last cyl. on the driver's side is #8 clostest to firewall #1 is on the pass. side front then 2,3,4
drivers side 5'6'7'8 most common fault is the coil on plug. check the spark plug for fouling and change if needed

Feb 17, 2009 | 2002 Mercury Grand Marquis

Not finding what you are looking for?
2002 Mercury Sable Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...