Question about Hyundai Elantra

1 Answer

I have a 1998 Hyundai Elantra the signal, brake and tail lights are not functioning. I replaced the flasher fuse thingy. Can you help? I read it may be a combination switch but, I do not know where that may be located.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

First of all, I have no IDEA what a 'flasher fuse thingy' is. I suppose if you want to start replacing components without determining they are the cause of the problem, I think you should start with the battery and work your way to the rear tail lights. OR, you could have the problem properly diagnosed and then you'd know exactly what's wrong with your vehicle and precisely what's needed to fix it. Ya think?

Posted on Oct 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace multi-function switch 2005 mariner


The tail light is usually a bulb with lower wattage, so it won't glow as brightly as the brake and turn lights.. There should be one or two other bulbs in either of the two tail assy's. The turn signal can use the same bulb as the brake light. If so, it's up to the flasher assy to direct the lights to both come on, and/or for one to flash if the brake and turn signal is on, e.g.. There could also be a backup light.

So if the brake and turn lights don't operate, look to the fuses, and flasher assy. for possible replacement.

Jun 01, 2015 | 2005 Mercury Mariner Premier

1 Answer

1991 Park avenue, Tail lights and license's plate light's stopped working turn signal's hazards and brake lights still functional. but no tail lights or license plate lights


Check for Power on your License Plate Light, more than likely you have lost GROUND

Turn Signals, Do the Front Work and the Back don't? If NONE then FLASHER FUSE

Apr 09, 2013 | 1991 Buick Park Avenue

1 Answer

I have a 98 eclipse. I was putting new tail lights on and then the signals stopped working along with the brake lights. the fuse to the brake lights had burnt so I replaced it. The signals however are...


IF THE TURN SIGNALS STILL WORK IN THE FRONT, THAT MEANS THE FUSE & THE FLASHER ARE OK. IF THE SIGNALS DON'T WORK AT ALL CHECK TURN SIGNAL FUSE & STOP / BRAKE FUSE. ARE YOU SURE THE CORRECT BULBS ARE BEING USED?

Jan 24, 2011 | 1998 Mitsubishi Eclipse

2 Answers

I have a 1987 Dodge Raider and have no brake lights or turn signals. I do have head and tail lights. Also, no hazard flashers. Fuses and bulbs all OK. I can't even find the flasher unit. I read...


A bad flasher would not usually cause no brake light, the problem you are discribing sounds like it could be a bad multi function switch, that is the turn signal/hazard switch, everything you have that is not wrking, goes through that switch on most cars. Would need to look and a schematic to make sure and do some voltage checks, but that is the direction I would trouble shoot it in.

Nov 21, 2010 | 1987 Dodge Raider

1 Answer

Fuse not blown on turn signal, but nothing comes on when i put turn signal on. Where is flasher located


Is your signal lights on, but no blinker? if yes, that means your flasher relay burned out. If there is no lights at all, replace your signal light bulbs.ok

Jan 27, 2010 | Hyundai Motor 2002 Elantra

2 Answers

1998 cavaleir


check relays and fuses under the hood............

Oct 28, 2008 | 1998 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...