SOURCE: How to replace power window motor on 2001 dakota
its not hard guys Take the door trim panel by taking off screws and mirror cover / pull out bottom of door and then sides pull up and outthen take off vapor barrier then look inside of door put tape on glass to hold it up take out bolts on the regulator and exchange it Please rate my response thank you very much
SOURCE: How do you install a window regulator for a 2001 dodge dakota?
well first take off the door panel it shouldnt be hard remove plastic cover off door.Make sure your window is all the ways up before you remove the motor.you can hold it up with duct tape or anything similar.Then remove the screw that go to the regulator sometimes it has rivets wich have to be drilled off.The new regulator should come with screws if it has rivets if not u use the same old screws.Also unplug the harness of it . Install new one,screw it on and reverse the procedure.Any problems keep me posted
SOURCE: Replacement of front driver side window regulator
maybe it is like a maxima...
http://www.a1electric.com/maximareg.htm
SOURCE: What size speakers are in a 1997 dodge dakota
Should be 6 1/2" speakers according to bestbuys website.
SOURCE: heater blower motor not working
try picking up a blower motor resistor, about 10-20 dollars at a local part store. then check this blog out. I have replaced 4 in my 2004 dakota, Takes about 10 minutes to replace, located on passanger side of truck above floor.
http://www.dakota-durango.com/forum/showthread.php?t=65326 WORTH READING AND HAS PICS !
95 views
Usually answered in minutes!
×