I need torque spec for rear caliper guide bolts and caliper bracket bolts for 2008 Honda crv?

Ah, here's the info for those...Tightening torque is 155 ft-lbs
NEW bolts don't reuse the old ones.

Tight enough to compress the sealing washer. Not enough to strip the threads. Some parts don't need a torque setting.

33 foot pounds is the answer.

Torque Specs for Brake Caliper Bolts - Chevy HHR Network

https://www.chevyhhr.net > forums > torque-specs-brak...

Apr. 23, 2017 - Brake hose-to-brake caliper bolt to the brake caliper, tighten the bolt to 44 N·m (33 lb ft). Been away on vacation, thanks ChevyMgr for the info!! ChevyMgr's ... Need Torque spec's for front brake job - Chevy HHR Network
Oct. 1, 2008
Front brake caliper bolts on 2010 1LT - Chevy HHR Network
Apr. 23, 2017
Tightening Torque Values for Common Maintenance Items
Apr. 23, 2017
Turbo coolant banjo bolts torque specs - Chevy HHR Network
Dec. 24, 2018
More results from www.chevyhhr.net

Hey Phil, sounds like you do quite a bit of work on your Tahoe.. you need one of these..

http://repair.chiltondiy.com/Pub/DIY/Product.aspx?ca=Repair&b=28779

Chevrolet Silverado Suburban Tahoe Avalanche GMC Yukon Yukon XL Yukon...

Chevrolet Silverado GMC Sierra 1999 thru 2006 2WD and 4WD

Those are Brake Caliper Bracket Bolts - Front
175 N?·m
129 lb ft
Brake Caliper Guide Pin Bolts - Front
Tighten the guide pin bolt closest to the bleed valve first.
64 N?·m
47 lb ft

....

2010-2017 Equinox

FRONT brake caliper BRACKET bolts Torque is 140 FT/LB and Caliper to the bracket is only 20 FT/LB.

REAR brake caliper BRACKET bolts Torque is 92 FT/LB and Caliper to the bracket is 20 FT/LB.

Remember rear bracket torque is different so don't forget as many DIY mechs snap that rear bracket bolt.

Use Thread Lock on caliper BRACKET Bolts.

Hello and welcome. here is the torque specs for the bolts.

Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
caliper brake bracket bolts torque to 180 n.m or 133 ft.lbs

Caliper bolt 25 ft lbs/ caliper bracket bolt 79.6 ft lbs

Tighten the 2 brake caliper mounting bolts to 108 Nm (80 ft. lbs.) . Caliper Mounting Bracket to Knuckle, Front (15 series) 175 Nm (129 ft. lbs.) Caliper Mounting Bracket to Knuckle, Front (25/35 series) 300 Nm (221 ft. lbs.) Brake Caliper Mounting Bolt Rear (15 series) 42 Nm (31 ft. lbs.) Brake Caliper Mounting Bolt Rear (25/35 series) 108 Nm (80 ft. lbs.) Caliper Mounting Bracket Bolt Rear (JC5/JH5) 200 Nm (148 ft. lbs.) Caliper Mounting Bracket Bolt Rear (JH6) 165 Nm (122 ft. lbs.) Caliper Mounting Bracket Bolt Rear (JH7) 300 Nm (221 ft. lbs.) Caliper Mounting Bracket Bolt Rear (NYS) 200 Nm (148 ft. lbs.)
hope this helps