You will get your solution and all info on service info, repair info, parts info, wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV,
owner's/service/repair/parts/maintenance manuals etc everything
this website www.reliable-store.com
it's a very good website for vehicle problems even as old as 1991 ford..
SOURCE: I am rebuilding 3cyl diesel
you will need a manual for this as diesel torque settings are different to that of a petrol engine.
SOURCE: oil capacity nissan td 27 engine
Hi! What I've done in the past is purchase two 5 litre containers of the correct grade oil then carefully topped up until just showng below Max level on dipstick I run the car briefly to check for leaks and to fill up new oil filter I let it settle on level ground with engine switched off then top up slowly to correct level, Oh I think you'll find 6 litres is the Norm!
Hapy New Year!
Paul 'W'
SOURCE: i need to know the vavle clearance of nissan z20 engine.
VALVE CLEARANCE ADJUSTMENT
Application In. (mm)
Intake .010-.013 (.26-.34)
Exhaust .011-.015 (.29-.37)
SOURCE: what is the valve clearance and head bolt torque
valve clearance is .014 inch for intake and exhaust with engine warm.
head torque it 21 ftlbs, then 44 ftlbs, then loosen all, torque to 89 inchlbs, then to 21ftlbs, then mark and turn the bolts an additional 60 to 65 degrees.
cyl head sub bolts torque 80 to 100 inchlbs.
thanks.
SOURCE: what" the right clearance for td27 engine diesel
what are the valve clearences of a td 27 diesel engine
1,855 views
Usually answered in minutes!
×