I tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. it wont move forward or reverse, engine is good both solenoids for forward and reverse work.
I don't have much
technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.com
SOURCE: 2002 dodge neon code p0750
im not a trans. expert but would verify the range sensor (gear indicating sensor) is working properly and the L/R solenoid is ok. those are the 2 suspects for your problem
SOURCE: my 91 dodge stealth is in limp mode how do i fix
Your car is in "limp"mode because the computer doesn't know what speed your doing,So it doesn't shift,
There are three possible reasons for this,
#1= input sensor faulty on transmission,
#2=output sensor faulty on transmission,
#3=speed sensor faulty on transmission,
you need to have the transmission codes read to know which one,Autozone checks codes for free.
SOURCE: how to replace a engine mount on dodge neon 05
There are 4 motor mounts on a Neon. You need a jack to support the bottom of the motor with a block of wood on it. 2 are easily replaceable, but there is one that goes to the middle of the front of the engine that is tricky, plus the transmission mount is accessed after removing several components, like the battery and tray. It may be better to have a professional take care of those "tricky" mounts.
SOURCE: reset dodge magnium in limp mode
Limp mode can be reset as eaily as shutting off the car and restarting it. the computer will then retest the system, if the problem is gone you will not go into limp mode. but if the problem is still evident, you will have to have it repaired before it will work properly.
SOURCE: I have a 2004 dodge ram 2500 stuck in limp mode.
Not really. You have to have the codes read. Could be as easy as replacing a solenoid. You have to remove the transmission pan to do it. Or it could be a transmission rebuild.
844 views
Usually answered in minutes!
×