Question about 1993 Toyota Camry V6

1 Answer

The front seat belts won't retract. they just hang loose. They don't even get tight once I put them on. Is there any way I can fix it?

Posted by on

  • cmrn16 Aug 07, 2009

    How do you get to the retracter? It seems to be down in the side of the body where the door meet. Do I have to pull all those panel and interior body molding?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Spray crc or another lubricant into the retracter and pull a few times

Posted on Aug 07, 2009

  • mark Aug 07, 2009

    spray crc or another lubricant into the retracter and pull a few times

  • mark Aug 07, 2009

    spray crc or another lubricant into the retracter and pull a few times

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 subaru forester front passenger seat belt is locked too tightly and will not release, how do I fix?


The reason is the belt mechanism is damaged and the belt needs to be replaced. What happens is the gears lock this usually only happens when the vehicle is in a collision or has a major and hard stop

Mar 29, 2017 | Subaru Cars & Trucks

1 Answer

Air bag code 33 for a 2005 lincoln town car


2005 Towncar SRS Code 33 (3 flash + 3 flash, repeat this set for twice. then Beep 5 times pause x 5 = 25 beeps every 30min).

This means you have problem with left (Driver) side pretentioner (Seat belt retract system).
It doesn't mean physical belt or retract mechanism.It is just bomb wiring which is part of airbag system.
When airbag deploy, passenger must stay tight in seat otherwise body lean to front then slam back to seat by airbag.
if belt is loose or delay to lock, passenger's body rocks back and forth.So, system use small bomb (Fire power) to lock and retract seat belt when airbag deploy.There is small bomb and igniter in part of Seat belt retractor.
Code 33 is warning for this part on 2005 Towncar.(older model is different meaning in Ford/Lincoln, it's possibly passenger side airbag system for earlier model)
Before you work for any part of Airbag system and touch any "Yellow connector", * *Disconnect battery (negative side is good enough) and wait at least 5 min to clear all power in system**.(Airbag store back up power for few minutes to be able to deploy even in case if power disconnected)
by the way, you should move your driver seat most forwarded position before you disconnect battery to make it easy to work with seat belt.
locate driver side seat belt retractor (in center pillar between front and rear door, you may have to fight with weather strip)

Locate Yellow connector on bottom of Seat belt retractor (it's called "Pretensioner")it is located on very bottom of rear side of retractor.
only one yellow connector. (make sure your battery is disconnected)
Check its physical connection or looseness.if connection looks fine, you may have to replace whole seat belt ($180-$200 in Lincoln dealer)
You can check if pretensionor is good or bad by regular tester, but unless you know how, I won't tell (because I don't wan't you to blow out pretentionor).








Jul 19, 2012 | 2005 Lincoln Town Car

1 Answer

Seat belt pasenger seat


Are you trying to say the seat belt retractor is stuck? This is in the front seat?
If it's anything like my Tahoe, you need to remove the plastic panel that covers the retractor (carefully - don't break the clips or you won't be able to put it back on). Take a large flat head screwdriver and slide it under the part where the seat belt coils up, and find a little tab - push it with the screwdriver. As long as the seat belt is not twisted up, it should retract.

Nov 30, 2011 | GMC Cars & Trucks

1 Answer

How to unlock a 96 corolla seatbelt that won't


the return spring may be broken, if so the seat belt will need replacing.....cheers.

Sep 09, 2011 | 1996 Toyota Corolla

1 Answer

Seal belts on both front seats (driver side and passenger side) will not pull out of the retractor. Don't want a fine for not wearing belt but it won't work. No one seems to know how to fix it. ...


No one can fix it!

Don't you find that odd?

You remove the plastic seat belt retractor covers,
on the floor by the "B" Piller

If you need to replace them, the retractors I mean, there
is a special GM Torx Driver Bit for seat belts

I would play around with them to see what the issues are

IF THEY HAVE AN AIR BAG INVOLVED e.g. SRS
System integrated into the seat belts,disconnect the battery
(before) you even think of going near the covers

Jul 01, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

The front seat belts wont work. 2001 Honda Accord


There is no reset as it were. The tensioner portion (main belt) will have to be replaced. These are non serviceable items.

Jan 16, 2010 | 2001 Honda Accord

1 Answer

How to fix a stuck seat belt VW GTI 2009


I just solved the problem for a stuck rear center seat belt in my 2002 Jetta.

Flip the base seat cushion forward against the front seat backs. Trace down along the belt to its tether point on the floor. The belt is sewn around a steel loop. The loop is anchored to a black steel hook. A thin silvery retainer plate is spring tensioned on top of the loop to prevent it from sliding off of the hook when the seat back is folded.

Therefore, you need to press the silvery retainer plate away from the hook (push up) to allow the loop to be slid from the hook. The belt was tight with the seat back in the upright position, so it was necessary to fold the seat back forward to create slack in the belt. Now push the belt loop towards the trunk and slide it off of the end of the hook (only possible with the retainer plate pushed up out of the way).

Now with total release of tension on the system via the bottom end of the seat belt being untethered and with the seat back returned to the upright position, normal extension and retraction of the belt will be reestablished. Next, simply extend the seat belt and slide the loop back into place over the floor hook. It snaps past the silvery retainer plate without all the effort required to hold the plate up during removal of the loop during disassembly.

Check again, the seat belt should be extending and retracting properly. Now just put the seat cushion back into regular position and you will be able to safely buckle up three people across the back seat.

It took about as long to do this repair as it has taken to post this answer to the problem. Note, the seat belt safety mechanism only allows normal extension and retraction of the belt when the seat back is upright.

Nov 29, 2009 | Volkswagen GTI Cars & Trucks

2 Answers

I have a 98 Toyota Camry and the left rear seat belt isn't retracting, it just hangs out full. Do I need to replace the entire belt or can it be fixed? If it needs to be replaced, how can I do it myself....


The belt will need to be replaced. never try to fix a seatbelt due to safety reasons. you can get complete belt from a salvage yard. just remove the bolt that secures it to the vehicle.
Be sure to tighten the new one down so it is good and tight.

Jun 03, 2009 | 1998 Toyota Camry

2 Answers

Electric retractable seat belt problem


check your fuses. there is also a lever next to te parking brake..make sure it's down

May 17, 2008 | 1988 Toyota Camry

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...