Question about 1993 Mercury Sable

1 Answer

I am trying to locate the turn signal/hazard relay, it is not in the fuse panel. It does not work so I can't locate by sound. Where should I look?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 103 Answers

Look in the fuse panel for the flasher, not a relay. It will be silver in colour,or clear glass, about 1" round and located in the fuse panel. This is probably your problem.

Posted on Jul 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

99 lesabre turn signals dont work wont even light up on the intrument panel but the 4 way flashers work


you have a bad turn signal flasher it looks like the hazard flasher but is a separate unit. its under the dash by the steering colume or fuse panel.

Aug 24, 2014 | Cars & Trucks

1 Answer

04 Hyundai, Hazards Work But No Turn signals


Always check the bulbs first. Then check for power ant the bulb socket. If the fuses are ok( some have seperate fuses for right and left).......More than likely its a relay wich should be located on or near the fuse panel.The turn signal and hazards usualy have the same type of relay. Swap the turn signal and hazard relays. If the problem is then oposite of what you had before, then replace the relay....

Mar 29, 2013 | Cars & Trucks

1 Answer

My blinkers stopped working. At first I had to manually "blink" them, today they wont turn on. The hazards work fine. Its a 1992 roadmaster estate wagon.


Your fuse is blown or the flasher relay is defective or both. Check the fuse first and replace as nexessary. Note that this vehicle has 2 flasher relays, one for the turn signals and one for the hazard lights. The turn signal flasher relay is located on the driver's side, under the dash above the kick panel, mounted in the top of the fuse panel. The hazard relay is located same place on the bottom of the fuse panel so do not get them mixed up.

Oct 05, 2010 | 1992 Buick Roadmaster

1 Answer

1998 taurus - turn signals were working - pushed the hazard lights button - hazards did not work and also now turn signals do not work


Check the fuse/relay panel for a blown fuse/relay. Also look at the turn signal flasher and the four way flasher located in fuse/relay panel for problem. If the fuses are good replace the flashers to correct the problem. Hope this will help you.

May 20, 2010 | Cars & Trucks

1 Answer

Where is the turn signal relay located in my 1999 pontiac grand am,,,,i already checked the fuses and the hazards work but no turn signals at all


the hazard button is the relay for both the turn signals and the hazards. you have to remove the trim panel that the hazard switch and radio are in pull it out of the back of that panel

Dec 28, 2009 | 1999 Pontiac Grand Am GT

1 Answer

The turn signals dont work on a 2000 Ford EXplorer


most likely not in the fuse box nor is it a relay, check the fuse and replace if necessary. Turn on your hazards and listen for a clicking sound under the dash on the drivers side. Normally the hazard and turn signal flashers or near each other. Not a Ford fan so I can't exactly say where it is located.

Aug 15, 2009 | 2000 Ford Explorer

1 Answer

1989 Lincoln Town Car Turn Signal Relay location


Thats strange they should be on the fuse panel ! Are you sure !!!!

Aug 12, 2009 | 1989 Lincoln Town Car

1 Answer

Are the turn signal relay and the hazard relay in a 1989 Lincoln Town Car without tow package different parts? The hazard relay is mounted on the fuse panel and it ticks when the hazards are turned on, but...


you should have two of the same part,one for the hazards,one for the turn signals
turn the signal lights on wither direction and listen for the sound follow it and you will find it.
If not look in three places two in the fuse box or aroung the general area,up on top of the steering colunmn and behind the glove box,sometimes you have to remove the inside glove box and it can be to the left of the hole,if you dont see it look harder and put your hand brhind the dash to feel for it,it sounds crazy I know.

Aug 12, 2009 | 1989 Lincoln Town Car

1 Answer

Can't find turn signal relay.


check the hazard switch on some cars its part of the hazard switch or if the conection is bad they none of it will work.

Mar 16, 2009 | 1994 Chrysler LHS

2 Answers

Turn signals don't work


i have a similar problem but my left signal works, when i turn the right on it just does an annoying buzz sound. if you can think of any explination for such shinanogins help would be greatly appreciated

Nov 25, 2008 | 1989 GMC K1500

Not finding what you are looking for?
1993 Mercury Sable Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...