1995 Isuzu Rodeo Logo

Related Topics:

Jonathan Peagler
Jonathan Peagler Posted on Feb 10, 2018
Be the first to answer

Where is the crank sensor located on a 95 Isuzu rodeo, v6 3.2lt?

Answer This Question

5 Related Answers

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Feb 04, 2009

SOURCE: 1992 ISUZU TROOPER Crank Sensor location

doesnt have one its inside the distributor

Ad

Anonymous

  • 13 Answers
  • Posted on Feb 15, 2009

SOURCE: 1997 Isuzu Rodeo

on the side of the block on the passenger side....u can see it through the wheel well

Anonymous

  • 28 Answers
  • Posted on Mar 07, 2009

SOURCE: Where is the Fuel Pump on a 95 Rodeo

The fuel pump is located in the fuel tank. To change it you need to releive fuel pressure, then unbolt the skid plate then the tank and it will be on top of the tank.

Anonymous

  • 47 Answers
  • Posted on Jun 27, 2009

SOURCE: Need to know where the o2 Sensor is located on a 1998 Rodeo.

look on the y pipe just in front of the cats.......

Anonymous

  • 61 Answers
  • Posted on Jul 24, 2009

SOURCE: Crank Sensor in 94 Isuzu Rodeo

it's on the bottom of the motor, towards the back on the passenger side. It has a small clip of wires and one screw holding it on. You may want to pull it up on ramps- if it'll run- otherwise, get under the Rodeo, it's up a little higher than the oil pan, and to the passenger side. (it's right on top of the two lines that run to the bottom of the radiator.) You will need a 10mm socket to remove it. I have added a few pics showing the location (i just completed this task myself)
bfcf016.jpg61ae995.jpgdeffbd6.jpgdd2e415.jpg

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2001 Isuzu Rodeo LS 3.2 DOHC 24 valve - V6.

camshaft position Sensor location???

 Isuzu SUV Forum https://www.planetisuzoo.com > threads > camshaft-po...
Jun 23, 2009 - It is located on the inside surface of the front of right cyl head. 2000 Rodeo LS (stock). 78 T/A (far ...

SOLVED: Where to locate the camshaft sensor on a isuzu

 Fixya https://www.fixya.com > ... > Isuzu > Rodeo
1 answer
It's on the inside of the cylinder head at the rear of the engine. Will be hard to see it because the intake plenum hides it. where to locate the camshaft ...
Doesn't include: LS ‎' Must include: LS

Where is the camshaft position sensor in my 2002 Isuzu ...

 JustAnswer https://www.justanswer.com > Car Questions
May 13, 2020 - My son is a mechanic and the Haynes manual says it's under the lower intake. Need to verify. Share this conversation.
1 answer · Top answer: you are welcome
Read full answer
Apr 14, 2023 • 2001 Isuzu Rodeo
1helpful
1answer

Where is camshaft sensor located on 2004 isuzu rodeo V6 3.5ltr
SENSORS (plural)
3.5L 4 cam engine? 6ve1? it has a real name BTW.
known real names makes help more easy and 10x buying parts.
on the 4 cam there are 2 CMP sensors on rear of heads

here?

http://jeepdied.com/look/alien-stuff/Isuzu/head%20cam%20sensors/35cmp1&2-location.JPG


if scans say it's ok, then it's ok (if dead start?, crank for 5 full seconds,see DTC now? )
no symptoms stated,why?

lean that scan tools show history of DTC errors(if lucky)
and live errors
the live errors are what makes savvy diagnosis win.
use the scan tool and learn to use it,its not hard.
Read full answer
Feb 26, 2017 • 2004 Isuzu Rodeo
1helpful
1answer

Locationing temp sensor on 95 rodeo 3.2
There are SEVERAL temperature sensors on your vehicle (battery temperature sensor, intake air temperature sensor, evaporator temperature sensor, etc....you really should specify.

I will assume you mean the Engine Coolant Temperature (ECT) sensor.
If this is the one you are looking for, it is located at the rear of the intake manifold on the left side.
Read full answer
Jul 09, 2011 • 1995 Isuzu Rodeo
1helpful
1answer

In Cab fuses box location for 1996 Isuzu Rodeo
I have a 95 Rodeo and the fuse box is behind a rectangular cover above your left knee when you are sitting in the driver's seat. It may be in the same location as the 96.
Read full answer
Apr 07, 2011 • 1996 Isuzu Rodeo
0helpful
1answer

Not getting any fire in 94 isuzu rodeo
SWITCH ASM; POWER,IGN COIL 8-94474-294-2 Go to myisuzuparts.com and find this part number. This part is under the intake manifold. No crank sensor as is has a distributor. 8-94474-294-2 1 05-1990 to 08-1994




Read full answer
Feb 22, 2010 • 1994 Isuzu Rodeo
3helpful
2answers

Where is the crank sensor located at on 1999 isuzu rodeo?
Where Is The Camshaft Position Sensor Located On A 1999 Isuzu Rodeo?
Read full answer
Jan 10, 2010 • 1999 Isuzu Rodeo
0helpful
2answers

MY 95 ISUZU RODEO STARTS OUT DRIVING GOOD THEN
THE PROBLEM COULD BE CLOGGED AIR FILTER OR FUEL FILTER.YOU ALSO COULD HAVE A RESTRICTED EXHAUST.
Read full answer
Oct 26, 2009 • 1995 Isuzu Rodeo
0helpful
2answers

1995-96 Isuzu Rodeo transmission swapable?
No they are not compatible. They changed the crank between 95 and 96. I have a 96 that needed an engine swap and the dealer that I bought it from was paying for the engine, he bought a 95 engine and after a month of trying the mechanic said no way no how, the crank between the two is different.
Read full answer
Aug 20, 2009 • Isuzu Rodeo Cars & Trucks
10helpful
2answers

Crank Sensor in 94 Isuzu Rodeo
it's on the bottom of the motor, towards the back on the passenger side. It has a small clip of wires and one screw holding it on. You may want to pull it up on ramps- if it'll run- otherwise, get under the Rodeo, it's up a little higher than the oil pan, and to the passenger side. (it's right on top of the two lines that run to the bottom of the radiator.) You will need a 10mm socket to remove it. I have added a few pics showing the location (i just completed this task myself)
bfcf016.jpg61ae995.jpgdeffbd6.jpgdd2e415.jpg
Read full answer
Jul 13, 2009 • 1994 Isuzu Rodeo
0helpful
2answers

Rodeo 95
try the fuel pressure regulator on the fuel rail, it sounds like its dumping to much fuel. the only other thing that may do that is something in your IAC ( Idle air control) could be stuck.
Read full answer
May 26, 2008 • 1994 Isuzu Rodeo
Not finding what you are looking for?

View Most Popular

1995 Rodeo

  • Cars & Trucks

Related Question

2001 Isuzu Rodeo LS 3.2 DOHC 24 valve - V6.

  • 2001 Isuzu Rodeo

1,342 views

Ask a Question

Usually answered in minutes!

Popular Questions

Fast Idle Problem With 99 Isuzu Rodeo V6

1999 Isuzu Rodeo

My 2002 isuzu rodeo transmission is slipping

2002 Isuzu Rodeo

It's a holden rodeo turbo/diesel 2005.check 4wd light on

2004 Isuzu Rodeo

Key stuck in ignition

2000 Isuzu Rodeo

2000 isuzu rodeo V6 3.2l thermostat replacement

2000 Isuzu Rodeo

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...