Question about 1989 Toyota Camry

1 Answer

Changed fuel filter had car ideling and it stopped now won't start. Being EFI do I need to bleed the system

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 767 Answers

You don't hve to bleed the system, since theres a powerful pump in the fuel tank which throws fuel to the system.
In order to check if you are getting fuel to the injectors or rather if the pump is functioning, you will have to open up the supply pipe which should be around the intake manifold.
But before you attempt tht, if you still have the old filter fit it back and retry, the new one could be faulty at the regulator valve!
Hope this helps!

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My isuzu trooper won't start after running out ov diesel changed filter still won't start what else can I do


You need to fill the fuel filter before installing it then you need to bleed the entire fuel system of air. There should be bleed screws and a hand pump to do this.

Dec 07, 2015 | Isuzu Trooper Cars & Trucks

1 Answer

85 toyota efi 3y-ec van won't start although have


have to clean pipe line which is going from fuel tank to engine

Mar 20, 2013 | Cars & Trucks

2 Answers

My 5.9 dodge cummins diesel won't start, I've replaced the fuel lift pump, and the fuel filter, turns over. But will not start?


Most likely you just have air in the lines.Crack them open one at a time and bleed them with the fuel pump off and on till you get fuel.If it fires dont hit the throttle let it sit and idle and close the line.Does it fire up with a small whif of starting fluid?

Mar 17, 2013 | 1999 Dodge Ram

1 Answer

My 2002 chev. diesel truck turns over but wont start, new filter


anytime you change the filter in a diesel you have to bleed the air out of the fuel system. The pump won't auto bleed the fuel system for you. every place in the fuel system that has a flare type connection needs to be bleed, start at the connection closest to the tank, loosen the connection and then crank the engine until you see diesel fuel drips from that connection. Tighten the connection while the engine is still cranking. Move to the next connection that is going toward the engine. Continue on in that manner toward the engine until you reach the injector pump/injector. Once you reach the injector pump be VERY aware that the fuel is at VERY high pressure. Do NOT put your body parts in the stream of high pressure diesel fuel. It could kill or injure you! Once you bleed all the way to the injector pump/ injector, the truck SHOULD start. Do not bleed after the injector pump because of the pressure involved, it is WAY too dangerous.

Good luck!

Dec 22, 2012 | 2002 Chevrolet Avalanche

1 Answer

Won't stay started after it warms up


First did you reset the computer after replacing each of these sensors? If you did then i would check the fuel pressure it should be 48-55 psi with the key on and the engine off.If its not within these specs then replace the fuel pump and filter.

Aug 17, 2012 | Cars & Trucks

1 Answer

1988 Isuzu Trooper II LS 4dr/4wd I changed fuel pump and inline filter about month ago, it will run but only if i keep it runinning with gas peddle at high rpms, will not idle as soon as I stop with...


Hi,
That looks like air in the fuel system. Bleed the fuel system by loosening the bleeder nipple, pump the bleeder( top of the fuel filter cartridge ) remove any bubbles that comes out from the bleeder, if there are no more bubbles tighten the bleeder and start the engine.

Hope that helps you out!

Aug 07, 2011 | Isuzu Trooper Cars & Trucks

1 Answer

Changed the oil and fuel filters in 06 duramax and truck won't start


IS THE ENGINE TURNING OVER? IF IT IS YOU MAY HAVE TO BLEED AIR FROM THE FUEL SYSTEM, IF THERE IS A MANUAL PRIMING PUMP, USALY BUILT AS PART OF THE FILTER HOUSING OR REMOTELY MOUNTED ON THE FUEL SYSTEM PUMP THE PLUNGER THILL IT GETS HARD THERE SHOULD BE A BLEED SCREW MOUNTED OPEN IT AND STROKE PLUNGER UNTIL YOU SEE BUBBLE FREE FUEL COMING THROUGH CLOSE OFF THE BLEED SCREW AND PUMP PLUNGER TILL HARD AGAIN THEN TRY STARTING

Jul 29, 2011 | Chevrolet 2500 Cars & Trucks

1 Answer

Won't start unless spray fuel change fuel pump did'nt help when it starts idel rough throtle up slowly it go about 3000 rpm start trying to die if you floor it from idel it will die but spray fuel...


Then its got to be a problem with the fuel delivery. You need to check that you're getting fuel from the tank.


1) Does fuel get to the filter? If not, is there an airlock or debris in the fuel pipe
2) Does fuel get past the filter? - If not, replace the filter.
3) I'm not sure if you have a carb. or injectors, but one or more of the injectors could be blocked. If a carb., fuel inlet jet may be blocked.
4) Finally, is the air filter good and clean.

Jul 01, 2011 | 1990 Ford Bronco

1 Answer

Fuel filter changed and now fuel line is airlocked


try taking off the line where it meets the efi housing and running the pump until the burping stops

Aug 25, 2009 | 2006 Audi A6

Not finding what you are looking for?
1989 Toyota Camry Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...