Need some straight answers as to who to contact about adding my 97 acura cl 3.0 to a list or something concerning a recall for transmission if its possible. Please help.

These are the same bolt patterns, bolt pattern is 4 X 4.5 or also known as 4 X 114MM. Measure 2 lugholes across from each other and it should measure 4 1/2" US or 114MM. the center hubs may be smaller/larger. Check the center hub size before purchasing:
1997 Acura- CL 16 x 6 (5 straight spokes)
1998 Acura- CL 16 x 6 (5 dual straight spokes)
1998 Acura- CL 16 x 6 (7 straight spokes
1990-89 Acura- Legend 15 x 5.5
1996-95 Acura- TL 15 x 6 (5 straight spokes with groove)
1997-98 Acura- TL 15 x 6 (11 straight spokes)
1994-92 Acura- Vigor 15 x 6 (11 triangular slots)
1999-98 Chevrolet- Metro
1989-85 Chevrolet- Sprint
1991 Dodge- Colt Vista 13 x 5 (15 slots)
1993-92 Dodge- Colt Vista 14 x 5.5 (5 straight spokes)
1992-84 Eagle- Summit/Summit Wagon
1992-91 Eagle- Summit 13 x 5 (15 slots)
1993-88 Ford- Festiva 12 x 4 40mm offset
1993-91 Ford- Festiva 12 x 4.5 40mm offset (8 elongated triangle slots)
1997-89 Geo- Metro
1999-92 Honda- Prelude
1999-90 Honda- Accord (4 cylinder models)
1999-91 Hyundai- Elantra
1995-92 Hyundai- Elantra 14 x 6 (16 slots)
1995-92 Hyundai- Elantra 14 x 5.5 (7 curved spokes)
1998-96 Hyundai- Elantra 14 x 5.5 (5 straight spokes)
1999-90 Hyundai- Accent/Excel/Pony
1994-92 Hyundai- Excel 13 x 5
1991 Hyundai- Sonata 15 x 6 (18 rectangular slots)
1994-92 Hyundai- Sonata 15 x 6 (9 triangular slots)
1996-95 Hyundai- Sonata 15 x 6 (9 straight spokes)
1997-95 Hyundai- Sonata 15 x 6 (5 twisted spokes)
1998-97 Hyundai- Sonata 15 x 6 (5 straight single groove spokes)
1995-90 Hyundai- Scoupe
1992-91 Hyundai- Scoupe 14 x 5 (6 curved spokes)
1995-93 Hyundai- Scoupe 14 x 5 (5 curved spokes)
1998-97 Hyundai- Tiburon 15 x 6 (5 twisted spokes)
1998-97 Hyundai- Tiburon 15 x 6 (5 raised straight spokes)
1989-81 Mazda- 323/GLC
1985-84 Mazda- RX7 GSL-SE 14 x 5.5 40mm offset
1991-86 Mazda- RX7 14 x 5.5 40mm offset
1987-85 Mazda- 626/MX-6
1994-91 Mercury- Capri 14 x 5.5 45mm offset (16 holes)
1994-91 Mercury- Capri 15 x 6 45mm offset (3 curved spokes
1994-91 Mercury- Topaz 14 x 5.5 (16 holes)
1998-92 Mitsubishi- Expo/Expo LRV/Vista Wagon
1994-92 Mitsubishi- Expo 14 x 5.5 (5 straight spokes)
1999-84 Mitsubishi- Galant
1991 Mitsubishi- Galant 14 x 5.5 (18 slots)
1991 Mitsubishi- Galant 15 x 6 (8 straight spokes)
1991 Mitsubishi- Galant 15 x 6 (5 straight spokes)
1993-91 Mitsubishi- Galant 14 x 5.5 (15 slanted spokes)
1992 Mitsubishi- Galant 15 x 6 (5 straight spokes)
1993 Mitsubishi- Galant 15 x 6 (8 triangular and 8 rectangular slots)
1993-84 Mitsubishi- Mirage
1993-91 Mitsubishi- 2000GTX 14 x 5.5 (18 slots)
1991-80 Mitsubishi- Tredia
1999-93 Nissan- Altima
1995-82 Nissan- Stanza
1991-84 Nissan- Maxima
1990-78 Nissan- B310/Pulsar
1989-94 Nissan 240sx
1989-94 Nissan Silvia
1986-82 Nissan- Sentra
1993-84 Plymouth- Colt
1985-79 Plymouth- Arrow/Champ
1999-89 Suzuki- Swift
1991-80 Toyota- Cressida
1985-80 Toyota- Celica

You would need to contact a dealer for that info. They will need the VIN as well as mikeage. Most recalls affect specific vin and have a mileage limit

You change the transmission control molcule (TCM).

sounds like the trnsmission filter may be plugged or the ports in the tranny may have clutch debris in them, either way it doesn't sound good..

the average price of that transmission is about $800 rebuilt, try this site and then its up to the mechanic where you take it for the installation charge

I am fixing to change my EGR valve and the piece of paper that came with the part say this:

Important Notice
Before installing this part, check the EGR valve passage in the intake manifold and clear any carbon blockage. Failure to do so will result in repeat malfuntion of the EGR valve system. Refer to a technical service manual or contact a service dealer for proper cleaning procedures.

Hope this helps.

Could be the ignition switch, if the green key light is flashing then the issue is the switch. There was a recall issued for the ignition switch for this car back in 03 for the 97 to 99 Acura CL.

It's usually the dip stick that is yellow. Be sure to bring the car up to operating temperature before checking/adding fluid. Almost sounds like a bad IAC valve or a vacuum leak.

they install an inline filter on one of the cooling lines as part of the recall