Question about 1997 Pontiac Bonneville

1 Answer

VENT FOR AIR CONDITIONING NOT OPENING - 1997 Pontiac Bonneville

Posted by on

  • lchildress Jul 30, 2009

    Thanx Michigan Man!!!

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

Check the vaccum lines under hood and also make sure they are not off behind the control unit itself try these website to see if you can get any more information car A/C repair www.directgardening.com fix & troubleshoot heating & A/C www.automedia.com i also would like to give you this information if you every have any hard to find GM- parts only its Schram auto & Truck parts 1-800-292-1032 and they website is www.schramauto.com best of luck Michigan Man.

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Odyssey air conditioning


HVAC Vent Doors under the dash- need to be diagnosed
One is not operating- to switch the air flow
HVAC Vent Door Motor or Vacuum Motor
which ever type you have

Jul 18, 2013 | 2005 Honda Odyssey

1 Answer

(Problem)Uncontrolled Opening And Closing Of Air Vent In Air Conditioning Air Way


It is a actuator motor that controls the vent doors,the dash has to be pulled back into the seats to access the actuator motors.

Apr 28, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2001 dodge ram 2500 diesel - my air conditioning blower is blowing but the air is not coming out of any of the vents


the flap inside the vent is not opening you will have to get under the dash and figure out why the lever isnt opening the flap

Dec 04, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Electrical problem under dash How do I remove dash?


c3eadb0.gif
Instrument panel upper trim panel

dbe998b.gif
Instrument panel


  1. Disconnect the negative battery cable.
  2. Disable the Supplemental Inflatable Restraint (SIR) system.
  3. Carefully pry upward, using a small, flat-bladed tool, to remove the defroster grille.
  4. Remove the Sunload and Headlamp Auto Control sensors from the defroster grille.
  5. Working through the defroster grille opening, remove 3 upper trim panel retaining screws.
  6. Remove the heater/air conditioning vents from the front of the instrument panel by releasing the tab on each side from inside the vent and pulling out.
  7. Working through the vent openings, remove 4 upper trim panel retaining screws and remove the upper trim panel.
  8. Remove the instrument cluster.
  9. Remove the right and left A/C vent trim panels.
  10. Open the trap door in the rear of the glove compartment and remove the passenger inflatable restraint wiring connector from the retaining clip on the rear of the glove compartment assembly.
  11. Remove the 4 glove compartment-to-instrument panel retaining screws.
  12. Pull the glove compartment assembly outward enough to access the wiring connectors for the glove compartment switches. Label and detach the wiring connectors.
  13. Remove the glove compartment assembly from the instrument panel.
  14. Remove the retaining screws and courtesy lamps from the right and left sound insulators and remove the sound insulators.
  15. Remove the steering column opening filler trim by grasping at the front and rear edges and pulling downward.
  16. Remove the 4 retaining bolts and the steering column opening bracket.
  17. If equipped with full console, remove the console.
  18. If equipped with mini console, remove the radio.
  19. Remove the headlamp switch module.
  20. Remove the 2 bolts and the hood latch release.
  21. Move the driver's seat to its full rearward position.
  22. Remove the steering column.
  23. Remove the 8 instrument panel retaining screws, detach the wiring connector at each side of the instrument panel, and remove the shims at the lower mounting screws.
  24. Remove the instrument panel with the aid of an assistant.
To install:
  1. With the aid of an assistant, position the instrument panel in the vehicle.
  2. Attach the wiring connector at each side of the instrument panel, install the shims and the 8 instrument panel retaining screws.
  3. Install the steering column.
  4. Install the hood latch release with the 2 bolts.
  5. Install the headlamp switch module.
  6. If equipped with mini console, install the radio.
  7. If equipped, install the console.
  8. Install the steering column opening bracket and the steering column opening filler trim.
  9. Install the right and left sound insulators.
  10. Position the glove compartment assembly and attach the wiring connectors to the switches.
  11. Push the glove compartment into place and install the retaining screws.
  12. Place the passenger inflatable restraint wiring connector on the retaining clip on the rear of the glove compartment assembly and close the trap door.
  13. Install the right and left A/C vent trim panels.
  14. Install the instrument cluster.
  15. Position the upper trim panel on top of the instrument panel, making sure the sensors are through the trim panel.
  16. Install the upper trim panel retaining screws through the heater/air conditioning vent openings.
  17. Gently push the heater/air conditioning vents into place.
  18. Install the upper trim panel retaining screws through the defroster grille opening.
  19. Install the Sunload and Headlamp Auto Control sensors to the defroster grille.
  20. Gently push the defroster grille into place.
  21. Enable the SIR system.
  22. Connect the negative battery cable.

Dec 01, 2009 | 1995 Cadillac DeVille

1 Answer

Air conditioning stuck on vent


the mode door motor is bad

Aug 18, 2009 | 2005 Jeep Wrangler

1 Answer

The air conditioning isn't blowing cold air anymore. It takes a while for it to get Cold, it blows cool air but not cold.


My name is Ron,and I have one solution,Sounds like you need some freon added,if that doesn`t fix ya ,the ac compressor could be weak,or blockage in ac system,or vent door not opening,or opening slowly,and not all the way...hope this helps,roniecon@gmail.com

Jul 19, 2009 | 1996 Ford Explorer

1 Answer

Air conditioning in 2000 lesaber


Vent door between the two sides isn't opening or the flex hose going between the two is off.

Jun 03, 2009 | 2000 Buick LeSabre

1 Answer

Control knob for air conditioning/vent control


tempareture control knob is need to replace

Apr 20, 2009 | 2004 Chrysler Town & Country

2 Answers

2002 Aztek Bllower resist


no, did you replace the passenger cabin filter? chance are it is to late...i just found out today it is best to bc it puts pressure on the blower....its in the glove box..

Aug 03, 2008 | 2002 Pontiac Aztek

Not finding what you are looking for?
1997 Pontiac Bonneville Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...