Question about 1991 Ford Aerostar Extended

1 Answer

It has no power and cuts out - 1991 Ford Aerostar Extended

Posted by on

  • woodall8462 Jul 31, 2009

    when you first start it it will run good but after it warms up the motor starts cutting out i changed the plugs

  • jkaygisiz May 11, 2010

    what has no power and cuts out on the van

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Most likely the altornator is gone..hope i solved your problem ;)

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I TURN KEY POWER CUTS OUT CLOSE HOOD HARD POWER RESTORES TURN KEY POWER CUTS OFF . TAP FUSE BOX POWER RESTORES TURN KEY POWER CUTS OUT. WHATS GOING ON I CHECKED WIRES AND CONNECTIONS IM LOST


Apart from the obvious electrical connections, you could try checking each fuse. Sometimes they appear to be ok but 1 end of the fuse may be broken and touches intermittently. Try lightly tapping each fuse 1 at a time with the handle of a screwdriver and see if anything goes on and off.

Mar 21, 2017 | Cars & Trucks

1 Answer

My 1991 jeep cherokee has a security system in it


You're going to have to essentially reinstall the system enough to figure out what's causing the no start issue. Is it a no power at all issue, a no crank issue, or a cranks but won't start problem.?

Alarms can completely cut power off to the key, cut power to the starter, or cut power to the ignition. You need to figure out what this system did. Maybe you can Google it and find out how it works or take it to a car alarm shop and see if they can tell you.

Most likely what has happened is when you removed the alarm you left some wires or removed some wires that ran power through the alarm box and then to whatever it was cutting power off to. Usually the main power to that flows to the key.

Good Luck!

Sep 01, 2014 | Cars & Trucks

1 Answer

2003 mustang when traction control light comes on the car lose power almost like shutting down, when it goes off it pick up speed.


The traction control system DOES cut your engine power when the tires spin. That is by design. The system cuts engine power to stop the wheels spinning and restores power once the wheels regain traction. It feels odd when the tires spin and power cuts out. It's good practice to lift off the accelerator when the system kicks in. Otherwise, if you are on gravel or slick streets the tires may spin, stop when traction control kicks in, and then spin again when power is restored. It is not an "elegant" solution but it does work for the most part.

Apr 03, 2014 | 2003 Ford Mustang

1 Answer

Start power cut


try the idle control valve it could be starting to fail.

Jan 20, 2014 | Saab Cars & Trucks

1 Answer

Emergency power cut now won't start


you cut cord have open circuit.your electrical cord has three wires neutral wire white wire black wires hot wire and bare wire for ground. if you cut either neutral wire or hot black wire in the electrical cord no power can flow to trimmer motor if you cut wire need to fix wire to get trimmer work again.

Dec 24, 2012 | Cars & Trucks

1 Answer

I cut the wires leading to the antenna and i lost my power locks power windows alarm and radio pre sets wha do i need 2 do


check your fuses, you must have blown one or more!!never cut wires while your battery is connected and never reconnect your battery while wires are cut and exposed!!

Sep 27, 2010 | 1995 Nissan Maxima

1 Answer

Location of the blower motor


from autozone.com: access from engine compartment


REMOVAL & INSTALLATION


See Figures 1, 2 and 3

  1. Disconnect negative battery cable.

7c87335.gif
Fig. 1: Exploded view of the blower motor assembly
  1. For the 3.1L engine, remove the alternator belt, then remove the alternator and position aside.
  2. For the 2.5L and 3.3L engines, remove the power steering pressure hose from the power steering pump.
  3. For the 3.0L engine, remove the serpentine belt.
  4. For the 3.0L and 3.3L engines, remove the retaining bolts from the power steering pump bracket, then set the pump aside.
  5. Detach the blower electrical connector, then, if accessible, remove the cooling tube.

When cutting the blower motor cover, make the cut just the thickness of the cover, which is1/ 8 inch (2mm) thick. Cutting deeper than that may damage the cooling tube.

For 1992-98 vehicles, partially cut the blower motor case cover, as shown on the cover. Cutting completely around the cover is NOT required. Swing the cut potion of the cover down.



973a989.gif Fig. 2: Some later model vehicles require you to cut the case, on the indicated lines, in order to access the blower motor

  1. If previously accessible, disconnect the cooling tube.
  2. Unfasten the attaching screws/bolts and remove the blower motor from the case.

1956a4c.jpg
Fig. 3: On 3.0L engines, you must remove the power steering pump for access to the blower motor
  1. If necessary, remove the fan from the blower motor.
  2. The installation is the reverse of the removal procedure.
  3. If the case was cut during removal, secure the cover using the three retaining clips. Tighten the blower motor screws to 44 inch lbs. (5 Nm).
  4. Connect the negative battery cable, then start the engine and check the blower motor for proper operation.

Sep 22, 2010 | 1997 Pontiac Grand Am

1 Answer

2006 Toyota Sienna..Power cut out during driving. But them works


The power cut of my Toyota Sienna2006 was activated, and the Sienna did not started even with jumper. What can I do? Please help me A.S.A.S.P.
Cynthia

Nov 15, 2009 | 2006 Toyota Sienna

1 Answer

2005 corolla wrecked fire cut battery main power


check for the red fuses those are usually power fuses check all red fuses make sure they are not burned

Sep 24, 2009 | 2005 Toyota Corolla

Not finding what you are looking for?
1991 Ford Aerostar Extended Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...