Im looking for mazda3 2007 model mains, big ends, and cylinder head torque settings

SOURCE: cylinder head torque settings for a toyota 1493cc

If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.

SOURCE: main bearings and big end bearings tension specs

This site has all the torque specs you should need make sure this is the correct engine.

http://www.davidfarmerstuff.com/C6Z06-Torque.pdf

SOURCE: Saab 95 Aero 2.3 turbo. I need torque settings

CYLINDER HEAD BOATS TORQUE FIRST PASS 29.5 FT LBS SECOND PASS 44 FT LBS.THEN TIGHTEN ADDITIONAL 90 DEGREES FOR MAIN BEARINGS 15 FT LBS TIGHTEN EACH BOAT ADDITIONAL 70 DEGREES ROD BEARINGS 15 FT LB TIGHTEN ADDITIONAL 70 DEGREES. CRANKSHAFT DAMPER BOLTS 130 FT LBS.

SOURCE: I am busy with an

timing marks

Navin Sharma

• 315 Answers
• Posted on Aug 10, 2011

SOURCE: we need torque settings on

What motor?