How do you change the ECM on a 2008 Nissan Pathfinder 4.0L 4x4? Is it a plug and play or does it have to be reprogrammed?

SOURCE: shifting 1998 nissan pathfinder into 4x4 low

Car has to be running in NEUTRAL or OFF he is correct. Good Luck

SOURCE: speedo not working on nissan pathfinder

check the speed sensor either at the transmission or on the front wheel axle. You have to remove the front wheel , rotor until you get down to the shaft. The speed sensor is right there on the passenger side of your car.

SOURCE: How do I reprogram my keyless entry fobs for a

closed all doors and lock the doors, then get the key in ignition in and out for 5 or 6 times, the ligths going to flush 1 time at this point just press any button in the key fob and redy to go

SOURCE: I cant find the engine number for my 98 nissan pathfinder???

Are you looking for a serial number of a model number? The 1998 pathfinders have the VG33E engine (introduced in 1996)

SOURCE: I have a 92 Nissan pathfinder manual 4x4. Where

All Nissan have the fuel pump relay near de ECU. But you must hear when starting working, and falow the click. The ECU is mounted under the pasanger seat.
About the Gauges, in the circuit of the front panel, it have a transistor that suply more or less 8volts to the gauges (gas and temp). Is possibly broken. You must replace it. But first, clean it with a contact cleaner; if the problem continue, replace it. Good Luck.