Question about 2008 Infiniti FX35
How much will it cost to replace a front passenger side door?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if it was me i would checkout all of the good salvage yard because i found a door for my 2003 Ford taurus for $65.00 at LKQ in Michigan phone is (269)345-1183 also would like to give you this information they sells only GM-parts its Schram auto and truck parts 1-800-292-1032 and they website is www.schramauto.com and also try this website to find a salvage yard near you its www.junkyarddog.com and i hope i was able to help you Michigan Man.
Posted on May 06, 2009
I had the same problem on the rear door of my 1998 528i and it was the door actuator that had gone bad. I had to take the rear seat out to get the door panel off. Once I had the door panel off it was not that difficult to replace the door actuator.
Posted on Jul 24, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then just remove the bolts for the mirror
Posted on Aug 14, 2009
to remove the panel they make special tools that make the job alot
easier available at most any parts store. that said there should a screw
that holds the trim piece by your door handal and then you will see nut
that holds it remove it this nut can also be located under the arm rest pad that should pop off make sure any door speakers are not mounted
through the panel if you have crank window one of the tools i mentioned
to remove the u shaped spring clip behind crank if you have pwr. windows there should be enough wire to pull it out + unplug it if not remove the trim plate + win. ctrl. the panel is held by spring clips use the other side of the window tool starting at the bottom work your way
accross + up both sides the clips will stay in the panel once yoe have poped all clips lift panel from sides over the top lip of the door + change
your mirror to put panel back line the clips up with holes + pop them in
make sure you pu the panel tool it's so much easier.
hope this helps good luck.
Posted on Jan 15, 2010
Tips for a great answer:
May 18, 2016 | 1997 Mercury Mountaineer
Nov 30, 2014 | 2008 Ford F-150
Aug 26, 2012 | 2001 Ford Focus
Mar 08, 2017 | 2002 Oldsmobile Bravada
Dec 28, 2010 | 2002 Chrysler Sebring
Dec 19, 2009 | 2003 Land Rover Discovery
Oct 14, 2009 | 2001 Chevrolet Tahoe
Jul 21, 2009 | 2005 Honda Accord
Jun 08, 2009 | 2000 Pontiac Grand Am GT
186 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: